1y ago

Not buying a shaver from Philips again..

Edit: see comments for clarifications.

I am probably late on this one, but god damn this is one nasty trick by Philips.

Context; I recently decided to upgrade my shaver, from a Philips One Blade to Philips an all-in-one-trimmer-7000. As you can see on the pictures below, they changed the charger for the adapter by maybe 1–2 millimetres, just so the old charger could not be used by the old charger. Now, this normally isn't a big deal, but with the new trimmer, the charger is USB-A only. Where's the previous one had the plug on it instead. To me this is mildly infuriating as I know need to get an extra adapter just to charge my shaver in the bathroom. They had the exact same design for the chargers, yet changed it just slightly so they wouldn't be able to be reused? Why... Philips... why?

Edit: many good points in the comments! I don't know how to manually check the voltage, but seems like folks figured it out in the comments too. Should have just been USB-C!

197 comments

Having experience with electromechanics - I have seen times where this was done on purpose to make sure that people aren't trying to reuse an incompatible plug for charging purposes. NiCd doesn't charge the same as LiFePo, Li-ion, etc. Charging voltages, polarities, stability of power output, etc.
To be fair though, they just need to make everything USB-C anyhow. Especially shavers.
- I bought this one from Conair because it is rechargeable with USB-C.
  
  And how is it as a device?
- My next shaver will be USB-C. It's now a standard for charging whatever you want.
- I know a lot of RC brands did this too. They didn't want people blowing up their Li-On batteries with old chargers, or getting complaints because it takes three days to charge.
- To be fair though, they just need to make everything USB-C anyhow.
  Careful what you wish for. Putting advanced electronics into very simple devices will just make them fail a lot faster.
  Some old device just needed 12V over a barrel jack to run some motor or light and charge the battery and it lasted a decade - only failed because the battery got old. New one now needs a state of the art power delivery chip to negotiate the right voltage and current, and all over a very fine pitch connector that will fail if you look at it wrong. Not looking good on the durability front at all.
  
  Are you Apple engieneer? Because I have no idea why PD chip is state of art for you
  
  Since when is a BMS advanced technology?
- No, shavers should not use USB C. Because in developed countries you cannot have USB in the bathroom. We have special shaver sockets and they're not USB compatible.
  
  Then you should refine your laws. Because my shavers all use USB C; and the EU has mandated USBC in specific products, and it wouldn't be a bad idea to expand that.
- The only issue I have with USB power solutions is that it's also capable of data transfer, which is bad. Imagine a dystopian future of being tracked by companies and governments by the places you plugged your shaver in at, of all the stupid things that could happen.
  If the only thing keeping a battery from exploding or corroding is a 4cm^3 box with a prong on one side and hole on the other then the people making the devices just need to incorporate power regulators into their designs.
  
  It's capable of data transfer...but to a power brick in the wall? Are there people who plug their shavers into their PC?
  
  Making communication over barrel jack is not hard either.
  
  We should all use public chargers. I heard they're safe
  
  USB is capable of data transfer but only if there's compatible hardware in the device. The shave it doesn't have any capacity to transmit data so what's it going to do there's nothing to track all they get is "someone has plugged something that requires some power into this port, but I don't know what cuz it doesn't have any brains"
  It is important to be wary of ways that you could leak data but at the same time it's also important not to go all paranoid tinfoil hat
  
  I think the bluetooth/wifi functionality on most modern electronics is much more worrisome than that.
the new trimmer, the charger is USB-A only. Where's the previous one had the plug on it instead.
Maybe I'm confused.
Your new trimmer takes in USB (Low Voltage DC) power.
Your old trimmer took in Plug (High Voltage AC) power.
If that's the case, yeah of course the plugs would be different? You'd fry the new one with the old plug.
- The OneBlade has a transformer in the wall plug part, the actual cable going to the handheld unit is only carrying low voltage.
  
  What low voltage though? Unless it's 5V like USB (non-PD and non-QC), they should and need to be incompatible.
- came to say that. Looks like the old one was 15v, while if the new one is USB-A it was 5v.
  Now, if it was USB-C, it could still have been USB-C!
- Neither of them take AC power. I have an older one similar to OP's old one. It uses a wall wart and the input is definitely DC.
Are you sure they charge with the same specifications? This might just be to avoid potential fire hazards & damage.
- Yea, one might be ~~alkaline~~ nimh while the other is lithium. Or maybe even just different flavors of lithium.
  
  does that matter? I though only the voltage and wattage would play a role
Nice of then to make sure you cant accidentally blow up your new razor because you assumed the old cable would work if it fit.
- So stupid idea. What if some 220V cable from a third-party manufacturer does fit?
  
  Plugging in a random cable from some random manufacturer is not a thing that most people would consider doing. (Furthermore, I doubt that any 220V cable would fit, these connectors on the picture are smaller than they look).
The old cable supplies 15V, which would fry your shaver that is expecting 5V
- I think the real sin here is making the shaver dependent on stored charge instead of just letting it run immediately after being plugged in.
  
  It's a common safety feature for wet & dry razors. It's so people don't take them into the shower or bath while it is plugged in.
  
  Battery charged trimmer lets you shower and trim, which is pretty awesome.
Is the charge voltage the same on both?
- I guess not, the USB one is 5V obviously, but the other one can be 12, 7.2, 8.4, 3.2, whatever
- Figure eight connectors like that input line voltage. So even if the charge voltage is different, the chargers still require the same line voltage.
  
  These are smaller plugs than the figure-eight cords you're thinking of that plug into old boomboxes, Playstations, etc. They're DC voltage, not AC.
  The WTF here is not that the manufacturer changed the connector slightly, it's that they were too cheap to include the AC-to-DC converter part of it like they did on their older models, so OP has to buy a USB wall wart to power the stupid thing. The fact that he can't use the old charger with the new shaver is just an irritating side effect.
I have both of these and one charger is 8v and the other is 15v.
Isn't it to make sure that you're not mixing two incompatible chargers? I have 2 Philips chargers that do fit (as far as I can see), but are not the same voltage. I've previously also had something like this where 2 fitting chargers were completely different electrically, one 12V AC and the other 9V DC. One time a family member mixed them up, bit luckily the extra voltage didn't fry anything. I don't mind having to get an extra charger of it prevents me from doing something dumb and frying my electronics.
I can tell you for certain, I measured my plug phiips (foil and 'one') and they are both 14VDC. So short answer is that the plug charger would blow up the usb trimmer you have (which is 5VDC).
The reason I know this and measured them, was because I wasnt sure the two plug chargers were the same, and I didnt want to blow up my philips one.
- Also the charger is required to show its voltage and amperage output ratings.
  
  This is true, but something about being an Electronics Engineer makes you want to check. (I didn't even trust Philips to get it right, but they did.)
  I didn't go into detail, but simple Dashed/Solid line doesn't tell you the whole story. Those simple wall warts are not fancy switch mode, or even old school rectified. I measured 14VDC unloaded, which I can probably guestimate in experience, to be a 9VDC loaded reading.
  The actual reading on wallwarts are generally untrustworthy, unless its a thing from Samsung or apple, where the circuitry are what you would expect (switched etc).
God, why don't they just make it usb-c PD and be done with it?
- This style of connector wedges itself watertight, so there's that
- Because USBC isn't watertight
  
  The one on my phone is though? It even knows when it's wet and won't charge until it's dry.
  
  Many wet-dry rechargeable razors don't let you run them when they're plugged in. Power cords + water = ⚡💀 ⚡
  
  You mean cable or socket?
- Here's my only issue with making everything in the world USB-C...
  Different cables have different functions or even are able to handle different voltages and amperage and right now, it's not clear what cable holds what functionality.
  If there were some sort of international color code standard or something, it would be perfect. As of now, I have to keep track of what cable goes with what device.
  
  Every cable should be rated minimum 5V 3A, have functional CC, power and data(Dp, Dn) pins as Type C spec requires. Which means it should also be capable of USB PD(still doesn't need data pins).
  AFAIK every in-spec cable should be able to carry 20V 3A.
  Problem is not bad standard, problem is non-compliant cables.
  
  If all your devices are USB-C PD rated then you only need to have cables and wall adapters for your highest rated device as all others will only demand what they can tolerate when the handshake happens after plugging in the cable. The only exception would be devuces that don't follow the spec but use the plug for cost saving reasons which is a completely seperate issue.
  
  I'm with you. Our phones, the laptop, the Switch, even my vape pen, all use USB C, but most of the cables we have only work on half the devices. Kind of defeats the purpose of being "universal".
- They used to be an insurance company. How can I trust them knowing that?
  Wahl for trimmers.
  
  Pretty sure they never were an insurance company. They’ve always made (consumer) electronics.
  
  They started out as a lamp manufacturer, not insurance.
Make sure the voltage and power requirements are the same. Maybe the old one cannot deliver enough juice for the new one.
That's one reason a lot of device designers go for USB C proper: it supports multiple voltages and multiple power levels, and in a way where the devices shouldn't be able to pull too much power from a smaller charger. (assuming they implemented the spec and didn't just use the plug anyways) In theory, one smart charger with enough oomph could charge anything that sticks to spec up to 240W.
- Yup. Lots of conflicting guidance here, but OP needs to check the actual power requirements for each. If they're the same, then okay, Philips were kinda being dirtbags with the plug. If not, whether different DC voltages or one feeding AC into the shaver body itself, then the bigger sin is not changing the plug MORE to make it more obvious they're not the same.
  
  Remember the good ol' days where it was barrel jacks or raw terminals regardless of what the device actually worked with?
  ahhh, those were the days ... of easily breaking things.
  
  looks like the old charger was 15V, while, if the new one is USB-A its 5V
are the voltages actually the same?
- I don't see how it could be. One plugs into line voltage and the other 5v usb. The reason they changed the plug size is probably to keep OP from frying his new razor.
  
  One plugs into line voltage
  Well, but that's not what's coming out of the end that you plug into the razor. The wall plug for it contains a transformer that steps it down to 15V. Would still be a bad idea, but it's not line voltage.
- I don't know how to check that, also can't find the specs on the old one.
  
  FYI, to figure this out you would look at the part that plugs into the wall. there's a bunch of writing on it. at one point it will say something like " input: 120-240 VAC, output: 15 VDC 0.5 A". that's true for pretty much all transformer bricks. like if you want to see how much a USB brick will supply it will say on there "5V 2A" or whatever.
Philips was a great company decades ago. They've really gone to shit. Especially their CPAP fiasco (Respironics recall).
- Philips sold most of their IP and companies use their name. Hue is not made by them either anymore. The CPAPs are made by another company that is owned by Philips. It's all just a name now.
  
  Good ol' late stage crapitalism!
If they are the same voltage just take a razor and shave some of the material away, I had to do this to get a c7 connector to fit into my xbox one, the rubber was just molded too far to fit
- Shave
  
  All that shaving just to shave.
The charging requirements have likely changed so the plug was redesigned sup you don't fry your new shaver using the old plug/adapter.
The battery died on my old shaver. Because I can't leave well enough alone, I decided to see if I could replace it. Spent so much time tracking down the battery model number and looking for a replacement only to find out it's a standard triple a. It's identity was obfuscated by the stupid labeling. Soldered it in and bam, razor still works for several years.
- ive got philips body groomer which in time become somehow a curiosity: once its fully charged it runs until battery gets dry as it should but if i by any chance press the button i need to the whole cycle charge
They all do this. Every time.
I’ll await the EU enforcing USB-C here too.
- Having USB-C PD on a Shaver would be nice, but also costly as it would require the Shaver to 'ask' the power supply for power. And they probably gonna save a penny there.
- EU enforces standard chargers, not type c specifically. It can be micro, mini or even type b
  
  Seems to be USB-C explicitly. But might change in the future. https://www.europarl.europa.eu/topics/en/article/20220413STO27211/usb-type-c-to-become-eu-s-common-charger-by-end-of-2024
Everyone of my Phillips trimmers use a different shaped port
So infuriating that they would send you a charger that works with the device 😤😤 how fucking dare they
My Philips shaver does not work whilst charging. What's that all about?
Luckily the battery is good but it gives very little warning when its about to run out. I dont grow facial hair very quickly or very thickly but several times I've had to leave the house partially shaved. Doesn't make any sense. That's the whole point of electricity, to use stuff whilst plugged in!
- Wet/dry shavers can't be used while charging because some moron will use it in the shower while plugged in. That's what the instruction booklet essentially said for my oneblade
  
  Yeah that's a regulatory requirement in some regions
  
  Ah fair enough. This never occurred to me as we dont have a power socket in the bathroom. Also I'm a typical man so didn't bother to read the instruction manual.
- Some of the older models work while charging. For example the MG7790 or MG7750/49 (not to be confused with the new version 7910/49).
  The reason I know this is because I recently bought one from amazon specifically because I want it to work while plugged in but they sent me one that doesn't (MG7770). I sent it back and now waiting for the correct one to be delivered.
Coincidentally, I just got a knock-off Soda Stream from Phillips. It's over $150 cheaper and works 2x-3x times better. I wanted to build something similar for a homemade soda bar concept, and discovered how truly cheap it can be to make soda and carbonated water at home. I was shocked at what a simple concept it is, and how much of a profit these sodas water companies make. Phillips even charging $50 for their system is a total rip-off.
Truthfully, I think the increase in quality in the Phillips machine is due to fewer parts is an "exception that proves the rule" as these in-bottle carbonators seem to work better with fewer parts. It's just a pressure hose connected to a co2 tank. Literally, all of $6 if you were to build one yourself from parts on Amazon (or $3 if you got he Alibaba route)
I truly believe that the fewer parts the better in any DIY or commercial product due to the less chance of a failure in a part if there are fewer parts. This works fantastically for the "lower quality" producing companies, like Phillips.
My inventive and engineering entrepreneur friends and I call this "fewer parts the better" concept, a "Murphy's law compensator" as the fewer parts there are, the fewer parts that can statistically "go wrong"
I lost the cable of a baby bliss trimmer. They have proprietary plugs that are about the same price as the trimmer. Moved away from them when ASAP...
Also very environmentally unfriendly. Shame on you, Philips!
From what I can tell, the non-USB OneBlades charge at 4.3V, not 5V.
It's probably a small enough difference that a 5V charger would work fine for the 4.3V shaver, but it wouldn't work the other way around.
Remington also have different plugs for different models.
Please update the post with the facts from the data sheet OP
Any change in the dc input/amps? Because that’s the only reason I would give any credence to it.
I saw a phone company make a trimmer, they used to do the same but now they are using USB c
I have the cheapest Philips shaver. It is pretty mid. It came with its own charger. On the shaver's side it looks like a standard ungrounded 220V female connection. But it actually is some propriety DC thingy. Very annoying. Why not just use USB-C?
- Until recently the reason was waterproof ratings.
  
  Phones never had any problem with it
- cheapest Philips shaver
  use USB-C
  You can only pick one
  
  cheapest house
  fire safety
  This is what regulations are for
  
  Isn't the standard a token amount of $1 or something for a license, I don't think price really comes into it.
After realizing both shavers and cordless toothbrush chargers are going this route, I gave in and installed these in the bathroom
Leviton T5632-BW R02-T5632-0Bw... https://www.amazon.com/dp/B002DQT22G?ref=ppx_pop_mob_ap_share
- The electrical code in my area requires using GFCI outlet for outlets within a certain distance of water source. I don't remember precisely the distance (and it likely vary a bit by jurisdiciton), but i know that in my bathroom, there's nowhere beyond it.
  In order to use that sort of outlet in a bathroom like mine, it would have to have GFCI protection as well as USB, be a second outlet wired to the GFCI protected terminal of a GFCI outlet, or be wired to a circuit breaker with GFCI protection built in, in the electrical panel.
  
  In all my cases where I installed those, I got lucky and the GFCI protection is upstream in another outlet somewhere.
  
  If you have more than one outlet in your bathroom and only one is GFCI, they are likely already wired downstream of the protected outlet and will be protected.
- Bad idea in this scenario.
  The previous model of shaver in this case took straight AC power with the transformer inside the unit, while the new shaver take 5V from a USB charger as the transformer. You'll blow up the unit if you do this.
- My guy this is why they changed the plug, so people wouldn’t plug the wrong cord into their shaver. They both come with one; did you think they were just like “fuck people who want a spare”?
  Man Apple really got into all your heads with their lightning cable shit didn’t they
- A few companies make reusable Brita cartridges which are designed to be taken apart. But I’m glad you found a way 😁
Yep. It's not too easy to find usb-c shavers yet though :/
My travel trimmer takes a AA battery and I just keep a little USB charger for that.
- I've seen rechargeable batteries with micro USB ports in them so you can charge the battery directly, you don't even need a charger. I thought that was pretty nifty.
  
  Could get those. Might be a good option for some. I just have a lot of rechargeables already for smoke alarms and clocks and what have you. I think I would find plugging in every battery individually to be more trouble. Even finding micro USB cables around the house is becoming a challenge.
That is so annoying.
Philipps is a shady company and I support anyone who decides not to buy from them ever again.
With the Hue bulbs the force you to share data, so I had to manually install an old version of the app just to not share data - no other way to opt out. So I can't say I'm surprised they pulled something like this.
tl;dr: Keep away from Philipps!
- Hue bulbs, Zigbee dongle, raspberry pi, HomeAssistant
  Boom no data sharing
that's the last electronic item they make without licencing out their brand
I use Soocas ET2. Maybe it's not the best trimmer, but at least it's super convinient and nice looking. I bought it for 30 €.
- How is the trim "not the best?"
  
  Not the sharpest blades.
My Wahl shaver has a charger like that
Last shaver I bought I made sure I could charge it off usb
If one of them is 5V then I have no idea why they didn't use Type B or Micro USB.
- Type B or Micro USB is the worst cable ever created. Change my mind.
  
  I literally won't buy a product that uses micro USB. It's the only.standard cable I have used where I've had both cables and the connector on the device fail.
  
  B is fine, just a bit big. Agree on micro though.
  
  Alternatives are worse
One is for charging the other is for power. There's a huge difference. At least with my phillips electric - the power inverter is inside the shaver. The cord is just a bog standard C-type power cord.
Your new cable is a charger cord -- because it's already pulling the correct DC voltage from the USB port.
[e] I was wrong - both my Norelco and my Andis foil shaver both have AC inverters on the charge cables. Interestingly, the Philips charges at 15v! Probably so you can use it while it charges.
Even thought I own a OneBlade (gift), I'm happy that my old-school, safety razor doesn't have any of the problems these modern shavers do.
They are more reliable, and they give a better shave, and they aren't plagued by planned-obsolescence, and....
- I didn't get a DE razor until I was in my late 30's. Gutted that it took me so long. I never really liked electric shavers so used your average Gillette razor and suffered from irritation up until I switched. DE razors are cheaper (in the long run) and easily a better shave. Not to mention no irritation.
  I'd say DE Razors are one of my life pro tips. It's a shame the large majority of nations use the traditional safety razor but then marketing and advertising has worked it's magic.
I know with one, its shit. I hate phillips for that
Could you shave (heh) a few millimeters with a cutter or something?

197 comments