Tell me why I shouldn't use btrfs
Tell me why I shouldn't use btrfs
About a year ago I switched to ZFS for Proxmox so that I wouldn't be running technology preview.
Btrfs gave me no issues for years and I even replaced a dying disk with no issues. I use raid 1 for my Proxmox machines. Anyway I moved to ZFS and it has been a less that ideal experience. The separate kernel modules mean that I can't downgrade the kernel plus the performance on my hardware is abysmal. I get only like 50-100mb/s vs the several hundred I would get with btrfs.
Any reason I shouldn't go back to btrfs? There seems to be a community fear of btrfs eating data or having unexplainable errors. That is sad to hear as btrfs has had lots of time to mature in the last 8 years. I would never have considered it 5-6 years ago but now it seems like a solid choice.
Anyone else pondering or using btrfs? It seems like a solid choice.
Don't use btrfs if you need RAID 5 or 6.
The RAID56 feature provides striping and parity over several devices, same as the traditional RAID5/6. There are some implementation and design deficiencies that make it unreliable for some corner cases and the feature should not be used in production, only for evaluation or testing. The power failure safety for metadata with RAID56 is not 100%.
https://btrfs.readthedocs.io/en/latest/btrfs-man5.html#raid56-status-and-recommended-practices
btrfs has been the default file system for Fedora Workstation since Fedora 33 so not much reason to not use it.
Btrfs came default with my new Synology, where I have it in Synology's raid config (similar to raid 1 I think) and I haven't had any problems.
I don't recommend the btrfs drivers for windows 10. I had a drive using this and it would often become unreachable under load, but this is more a Windows problem than a problem with btrfs
No reason not to. Old reputations die hard, but it's been many many years since I've had an issue.
I like also that btrfs is a lot more flexible than ZFS which is pretty strict about the size and number of disks, whereas you can upgrade a btrfs array ad hoc.
I'll add to avoid RAID5/6 as that is still not considered safe, but you mentioned RAID1 which has no issues.
Did you set the correct block size for your disk? Especially modern SSDs like to pretend they have 512B sectors for some compatibility reason, while the hardware can only do 4k sectors. Make sure to set
ashift=12.Proxmox also uses a very small volblocksize by default. This mostly applies to RAIDz, but try using a higher value like 64k. (Default on Proxmox is 8k or 16k on newer versions)
https://discourse.practicalzfs.com/t/psa-raidz2-proxmox-efficiency-performance/1694
I've been using single-disk btrfs for my rootfs on every system for almost a decade. Great for snapshots while still being an in-tree driver. I also like being able to use subvolumes to treat / and /home (maybe others) similar to separate filesystems without actually being different partitions.
I had used it for my NAS array too, with btrfs raid1 (on top of luks), but migrated that over to ZFS a couple years ago because I wanted to get more usable storage space for the same money. btrfs raid5 is widely reported to be flawed and seemed to be in purgatory of never being fixed, so I moved to raidz1 instead.
One thing I miss is heterogenous arrays: with btrfs I can gradually upgrade my storage one disk at a time (without rewriting the filesystem) and it uses all of my space. For example, two 12TB drives, two 8TB drives, and one 4TB drive adds up to 44TB and raid1 cuts that in half to 22TB effective space. ZFS doesn't do that. Before I could migrate to ZFS I had to commit to buying a bunch of new drives (5x12TB not counting the backup array) so that every drive is the same size and I felt confident it would be enough space to last me a long time since growing it after the fact is a burden.
One time I had a power outage and one of the btrfs hds (not in a raid) couldn't be read anymore after reboot. Even with help from the (official) btrfs mailinglist It was impossible to repair the file system. After a lot of low level tinkering I was able to retrieve the files, but the file system itself was absolutely broken, no repair process was possible. I since switched to zfs, the emergency options are much more capable.
What kind of disks, and how is your ZFS set up? Something seems amis here.
My setup is different to yours but not totally different. I run ESXi 8, and I started to use BTRFS on some of my VM's.
I had a power failure, that was longer than the UPS could handle. Most of the system shutdown safely, a few VM's did not. All of the EXT4 VM's were easily recovered (including another one that was XFS). TWO of the BTRFS systems crashed into a non recoverable state.
Nothing I could do to fix them, they were just toast. I had no choice but to recover using backups. This made me highly aware that BTRFS is still not a reliable FS.
I am migrating everything from BTRFS to something more stable and reliable like EXT4. It's simply not worth the headache.
Not proxmox-specific, but I've been using btrfs on my servers and laptops for the past 6 years with zero issues. The only times it's bugged out is due to bad hardware, and having the filesystem shouting at me to make me aware of that was fantastic.
The only place I don't use zfs is for my nas data drives (since I want raidz2, and btrfs raid5 is hella shady) but the nas rootfs is btrfs.
If it didn't give you problems, go for it. I've run it for years and never had issues either.
Meh. I run proxmox and other boot drives on ext4, data drives on xfs. I don't have any need for additional features in btrfs. Shrinking would be nice, so maybe someday I'll use ext4 for data too.
I started with zfs instead of RAID, but I found I spent way too much time trying to manage RAM and tuning it, whereas I could just configure RAID 10 once and be done with it. The performance differences are insignificant, since most of the work it does happens in the background.
You can benchmark them if you care about performance. You can find plenty of discussion by googling "ext vs xfs vs btrfs" or whichever ones you're considering. They haven't changed that much in the past few years.
btrfs raid subsystem hasn't been fixed and is still buggy, and does weird shit on scrubs. But fill your boots, it's your data.
I run it now because I wanted to try it. I haven't had any issues. A friend recommended it as a stable option.
I am using btrfs on raid1 for a few years now and no major issue.
It's a bit annoying that a system with a degraded raid doesn't boot up without manual intervention though.
Also, not sure why but I recently broke a system installation on btrfs by taking out the drive and accessing it (and writing to it) from another PC via an USB adapter. But I guess that is not a common scenario.