I want to hound people for getting a Bambu. Look at the bullshit we're dealing with on 2D printers because they aren't open source with standard parts.
While good printers, the amount of waste those Bambus produce just don't make them feasible in my eyes. If you use 4 colours, they waste about 44cm of filament while you haven't even started printing.
all very accurate but I want to add that eveb if you want to resin print in your bedroom you wont be able to. It's not only that it's toxic but the smell is so strong that, at least for me, it's impossible to be around it. My printer is outside in the garage and when it's printing you can still smell it inside the house.
I can feel my cells mutating in real time
I want to get started 3d printing, partially because I bought a house and farm and need to replace some little bits and bobs that don't necessarily need to be super strong. It just seems a bit too much to try to figure out right now.
I went a little crazy on 3d printing during covid. I had a single printer prior but purchased two more. I haven't printed on ANY of them in like 2 years. I end up just printing stupid shit or because I go so long between printing wasting way too much time to get everything dialed back in. Now I don't even know what my slicing settings were and I would have to probably start from scratch. I should probably just sell my printers....
I printed a lot of custom stuff that I designed for specific uses in Fusion 360 when I got my computer, and for about two years afterwards. But I don't have any more custom stuff that needs to be printed, and I don't have a D&D group any more, so my printer has been sitting for about six months. I'd say it's a success though, since I made everything I need, and it'll still be there if I ever need anything else.
Having a 3d printer is super convenient for any home or shop repairs I need to make. I have so many curtain spacers and custom hooks all over the place now. The key is to get some hours in Fusion or some other good CAD software so you can whip up custom parts in minutes. You may get it wrong the first few times, but a couple minutes of tweaks and then you have a new part printing while you go back to working on other stuff.
The Swedish Maker just put out a video about how transformative 3d printing has been for his workflow. https://youtu.be/p2bClWmKHRM
That's fair, there is a bit of information overload online when looking into it.
If you want my two cents, find the cheapest print with auto bed levelling (mingda magicians are good and cheap) and just start playing around.You don't need to know much to start, and you learn what you need to as you encounter problems.
That's how I got into at least, and now been printing for like 5+ years.
Make sure the screws are snug and the beams don't move. Level the bed, Youtube how. Then get a micro SD card and a slicing program. Slice the model, save to card, insert in printer, hit print from file and select the file.
That's like 95% of it. The other 5 is endless struggles and troubleshooting, but you can worry about that when it comes to it lol. Oh also keep filament dry.
People give the Ender 3 a bad rap all the time, but it's honestly a great little machine. I far prefer it to the $2500 printer we have at work that has "automatic everything" and can't easily be adjusted to manually correct its bad settings.
With that said, how far have you gotten with it? Do you have any software installed? Have you tried printing anything (and was it successful)? You didn't give much clue as to where you're stuck. Yes you need to take some time to learn how to fine-tune the settings, and yes it can be frustrating because there is SO MUCH to learn about 3D printing, but once you get over the hump you can start cranking out all kinds of fun things.
Not the person you responded to, but I had mine set up. I had the software installed, I (thought) I even had the bed leveled, but every print either failed to stick to the plate, or eventually stuck to the nozzle. I ended up with a lot of spaghetti. I got frustrated and decided to take a break. I'd come back to it fresh, and see what I could do.
Not op, I got a free Ender 3 from a frustrated co-worker, and am now the frustrated co-worker. I've tried getting a new glass print surface, tried using glue sticks, tried changing print temps and speeds, tried levelling and re-levelling and re-levelling the bed, but I just can't get the print to stick for love or money. It's now been re-homed to the garage, as a parking obstacle for my bicycle.
Honestly when it works it works wonderfully. Most of my problems with my ender 3 come down to me being a dumbass and not taking care of it properly, and/or just the nozzles they ship with it being cheap as fuck and impossible to cold pull.
No joke my first ever successful cold pull was 2 days ago, because I had finally gotten a decent set of nozzles.
If you want to get really serious about printing there are better options out there, but for the cost they really are awesome beginner printers (to be fair I haven't kept up much with printers, so I don't know many other good cheap ones). I mostly only dabble with printing, but my ender 3 pro that I got like 3 years ago has served me very well.
I found a printer in the trash that I grabbed, it had motors and frame but no PSU and mainboard. Five years later it is in worse shape than it was because I took the extruder off. I like to make progress on stuff by just increasing the scope so that it is overwhelming.
It's the raspberry pi of printers. It's good for hobbyist and as a learning platform. its very cheap to get/mod and find parts.
But it's not reliable enough for someone who wants printed parts. People who know 3d printing will underestimate the knowledge needed to use one of them.
They have like 236 ender 3's nowadays, ofcourse i'm not asking google as i'll end up on some website that's shilling for creality and completely ignores the other brands.
I usually just use it to find some sort of peer reviewed recommendations (ie YouTube reviews) - it's usually pretty easy to tell there who's being genuine
No and I hate it :( Even if there are a few legit review sites still around it's near impossible to find them among all the fake reviews being pushed by search engines
Let the bed cool down all the way, ya little gremlin! If you absolutely can't wait, put the bed on a tile floor and your print should pop off on it's own pretty quick.
Consider post processing steps if you really need smooth parts. Sandable fillers, special paints, epoxy coatings, or just a bunch of sanding. I've had good luck with XTC-3D. It's an epoxy you paint on that's specifically designed for smoothing prints.
You could also consider a resin printer if you need smooth. They are their own can of worms, but the resolution and smoothness is good.
Yep, you'll never get it perfect, but a smaller layer height will make the steps less noticeable. Adaptive layer height in cura if you use that can help, but adds a mortal age to the length of the print.
Pretty much all the reasons I can't stand most 3D Printing communities on the internet. Too much basic troubleshooting answered dozens of times already and not enough cool projects.
I bitched at someone on reddit about that once... Asked a similar common question and so I asked them if they even bothered LOOKING at the sub before they posted because that exact question had already been asked three times that day! There's being lazy, and then there's crap like this.
The reason that in the middle is happening is that the temperature is wrong, judging by the inconsistent thickness of extruded material and lack of adhesion. If it's a high heat filament like PETG then the printer might be stopping and resetting because its got a heat sensor with a low upper limit.
Two printers were fighting for the same bed (one with black filament and one with white). Obviously the black printer won and finished the print perfectly.