Instruction unclear, spent more money than I had, so now I owe the mafia money. Any idea on how to pay them back?
Nah, not much of an achievement hunter. And filling in the map in GBC Zelda usually gets you most of the secrets.
A lot of ubisoft and ea single player games since they don't need uplay
Case in point Assassins Creed Black flag which requires a login at the start of search session, runs flawlessly on CEMU
"Vita means life"
Not that Sony game it any chance
I've tried it, but honestly when I started this session of Ages I didn't care. Might do it when replaying Seasons thou.
Had a Vita 1000 since launch (got the first edition bundle). Then years later I got a Vita2SD which destroyed the card reader (my mistake). So I got this JP Vita 2000 since I wanted one in Blue and the Vita 2000 is pricey.
Retroarch is a wonderful tool to play older games on whatever you have, though it's a lot of work, the effort to get a device like a GBxCart or to hack a 3DS to get the ROMs is worth playing.
Personally I miss small form factor systems like the Vita, and hope that there will be a Steam Deck Lite one day that is pocketable.
Got seasons when it was on 3DS VC and beat that a while ago. Love the password progress thingy.
Got the games years ago for the GBC, and I've always love it. But I always got stuck in a handful of dungeons. Level 3, level 4, level 6, and finally the black tower.
But I was finally able to solve it myself with no hints! This is in my view one of the best Zelda games.
Oldest system, by release year its my Hong Kong 6 Switch Atari 2600. Local guy was selling it and it was in immaculate condition. Dust cover on the system, with boxed games.
At the time I was selling games and systems, so I kept the system and 2 games for myself. Don't use it much since its a 2600, but I have it on my shelf.
Oldest system I own is my GBC, had it since before my youngest sibling was born and I still have it today. Obviously doesn't get much use since GBA SP, but I still keep it around.
Mostly the sub $5 games since if I don't play it, its fine. Like Celeste
Honestly for art I’ve started using my iPad for it, and transferring the results onto my Mint install. Since mint or gnome (not sure which one) integrates Apple file sharing into the files app.
I too install Linux Mint, though Fedora Silverblue and Kinote is another good alternative.
The FunkoPop Store EB Games here in Canada were re-labeled to GameStop recently. They're still in every Mall in the land from what I've seen. Though they are doing better. Game selection isn't what it use to be, but the variety is growing now. I was surprised when I found Manga in our local GameStop.
Not exactly my cup of tea, but catering to "Nerd" culture, and going beyond "Merch" is something I can get behind, since it's rare to see another store not selling the same old drivel as everyone else.
I've been at this for years, most of my designs are like your solid parts (Display Stands and DS Stylus). I've only recently tried experimenting with moving parts, and I've found using mixed mediums the best when 3D printing. i.e. using cloth or leather as the moving medium, with TPU or PETG for strength/flexibility.
As for what this is for. I've designed and made 3D Printable e-reader cases, which this link will show you the printable parts for, but I'd like to make a case for my iPad and other tablets, however I want to be able to prop it up and for it to be stable. This is designed with my cases in mind, and it has the clearance to lay flush with the back panel.
End goal is to have this embeded in the back so I can prop it up landscape, while I have another in the sleep cover so it can be propped up portrait, like an easel.
I could achieve the same effect by making the arms thicker. Though I am thinking of printing the screw caps in TPU to see if I can make it stiffer that way.
Trying to keep the parts the same as the main thing this belongs too. M2 threaded inserts and 5mm screws. So not a lot of flexibility when it comes to thickness. That said, as a MK2 I'd probably make it 2mm thick rather than 1.2mm since that's my goto size for stiffness.
So I wanted a small, and thin friction hing for another project, and I couldn't find the metal ones that they use for the iPad's Magic Keyboard case. So I design my own the parts I had on my desk.
The smallest nut that I had was 4mm wide which really limited how thick the design can be. The result is this
It folds flat at measure at a maximum thickness of about 10mm
It works a lot better than I thought it would, especially since this is my first prototype print. Need to figure out some things, like to stiffen the arms and to prevent/reduce twisting.
But as a basis to start from this works nicely. I think if I add a TPU washer on the back end, I might be able to get it stiffer and more consistent feeling. But I'll do that at another time.
Somewhere between Minecraft Java edition and a modern title made with the Steam Deck in mind, like TMNT Shreaders Revenge.
I'm just happy to see a slowly increasing support base, even if its just to support wine
I always thought that it was the computer adjusting the view for the crew. I mean its not a window its a screen.
I didn't have to do that. Bought my parts from Canada Computers and they open the Motherboard box in store before the sale, to inspect it, and I had to sign off on it.
That said I had some issues of my own design. My PC has a space for a 3 1/2" floppy and I wanted it internal so I got a USB adapter for it to run off of the internal header. The damn board locks up on boot if its in.
Probably a setting but still annoying
While its annoying, its so easy to unsubscribe that I see it as a fair price for a free game.
So a very long time ago now, I upgraded from my ancient AMD FX 6100 to a Ryzen 5 1600, and now I am on my 3rd CPU with an Intel i3 12100f.
Why did I go with an i3 and not the i5? Simple, I was on a budget and I couldn't justify spending more than $250 CAD for this upgrade. I could've squeezed in the 12400 if it was in stock, but it wasn't.
Why didn't I just get a new AMD CPU and slot it in? Well I tried, but my Gigabyte motherboard (even with updates) refused to play nice with the 5500 I tried to upgrade too. If I was keeping with AMD I'd need to buy a new Motherboard and if I was buying a new Motherboard for this I might as well get the best bang for my Buck.
So what did I get.
Motherboard: MSI PRO B760M-P since it had the IO I wanted (2x M.2 slots and a USB C Port on the back)
CPU: Intel i3 12100f
And the results are... honestly surprising. Despite loosing 2 core and 4 threads, I gained in performance everywhere, or I was GPU limited with my 3050. 2 minutes off of my 10 minute handbrake render, 50fps extra in Doom 2016, and a doubling in Geekbench single core performance which I need thanks to my work in FreeCAD. FreeCAD is still slow, but the models I am loading are demanding.
Overall I am happy with my upgrade, and the best part is, since I am buying my Motherboards at the end of a socket generation rather than the beginning, it means when I want to upgrade in a few years, it should work with intel 13th and 14th gen CPU's.
Geekbench before: https://browser.geekbench.com/v6/cpu/6614622
Geekbench after: https://browser.geekbench.com/v6/cpu/6616466
TL:DR Emulators installed via Flatpak won't recognize steam inputs during remote play, However AppImages will work. So if you want to play PCSX2 via Steam Link from your main rig, install the AppImage version.
So this whole journey started when I wanted to play PS2 games from my PC on my Big Screen TV. Years ago I got a Steam Link, and outside of it forgetting my Bluetooth devices it's been quite reliable.
However when I switched over to Linux and installed my emulators via Flathub, I could start the emulator, but outside of mouse inputs, the emulator refused to recognize the inputs outside of those directly connected to the PC. I presume it's due to how Flatpaks work.
Reported the problem on the Steam Linux Beta github page, but that still left me without a solution. It's not like there exists a *.deb for every emulator, and if there existed one, it was out dated, so it was hit or miss if I could start a game with a controller.
However when I tried AppImages, it worked! I presume it's due to the fact that the AppImage runner is a locally installed package, which means it can hook into the systems inputs, like Steam Input. Thus far I've tested PCSX2, DuckStation and Retroarch, and everything appears to be working beautifully!
Running Linux Mint, with the latest updates on both my iPad and my PC. And it just worked. Needed to put my password in to trust my device, but duuude! It just works. So nice.
Here is the reverse side:
For the long and short of what this is. I make 3D Printable e-reader cases that are held together by stitching cloth or leather. Up to now the cover had the magnet as a part of the design, but with no way to upgrade or change it out. This is my solution for that.
With 8 screws and a tight fit, the cover can be swapped out when you upgrade or change out your e-reader. That way you can keep the case itself and just upgrade the components you need when you need it.
Still testing it, but very happy with how it turned out.
I feel this happens to everyone. Buy a PC, be happy that it's better than what it replaces, then after a few years get annoyed that's slow.
This happened to me with my now 6/7 year old Ryzen 5 1600x. It was so much faster then my FX 6100, but my workload changed, and while multicore it's good, single core leaves much to be desired, especially since my CAD software of choice FreeCAD is very dependent on single core/thread performance.
So I've been keeping an eye on the markets, waiting for a deal to be had, and I found one, with the Ryzen 5 5500 going into my budget. So I bought it thinking that my old Gigabyte B350M Motherboard would support it. I mean Gigabyte says it's supported and they've never lied about anything before... let alone deny by rebate claim for my laptop.
So I installed the CPU, booted it up, and boot loop. So I took out a stick of ram and it posted, was planning on fixing that later. Configured my BIOS to my liking, saved and restarted into my OS. It booted, for 3 seconds, then promptly black screened and crashed. Not even the power and reset buttons worked, so I had to hard kill it.
OK Troubleshooting time. Check BIOS version. 52h, hummm looks good but there is a 53, lets install that. And a reboot after, no fix.
OK let ask Google, within the dozens of responses asking for BIOS version, there was reseating the RAM. That did nothing, and underclocking the CPU to 3000MHz. That shockingly worked, and I booted into my OS. Neat, I can troubleshoot that later.
Now let's install my other stick of RAM and lets get to fixing this sucker... and it's boot looping again. I've reset the CMOS, put both sticks of RAM into all slot configurations, and nothing.
So I re-installed my 1600x to sanity check myself, and it worked, with both RAM installed. So back to Canada Computers I went to get a refund. While I was tempted by the Intel CPU's on the way out, I got new thermal paste and now I am writing this post on my PC with the 1600x.
Lessons I learned today.
-
If you are upgrading a 1000 series Ryzen stick with the 3000 series as 5000 compatibility is dodgy depending on the manufacturer.
-
The Manufacturers can and will lie about compatibility, and hardware upgradability is hit or miss depending on the Motherboard.
-
I'm not buying from Gigabyte ever again. Though I've heard Asus isn't much better.
Now PLEASE NOTE BEFORE COMMENTING. I do not have the 5500 and will not go back and get it again, so no troubleshooting, please. I just wanted to share my experience and kind of warn those who plan on doing the same.
You can download the files on:
Thingiverse: https://www.thingiverse.com/thing:6615905
Printables: https://www.printables.com/model/874747
FreeCAD Design Files: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA%20E-Reader%20Cases/6%20inch
The files are for all the 3D Printable components which makes up the e-reader case. What's not included in the files is the cutting profiles for the case that holds it. But you can just use duck tape or some flexible adhesive and it'll work. Along with the screws, nuts and magnets required.
From the videos description: News on what the UK government response means on the issue of game destruction by publishers! It's not all awful, just most of it! Also, some news on how the campaign to end game destruction is going internationally. Relevant links below:
Australian Petition: https://www.aph.gov.au/e-petitions/petition/EN6080
UK Petition: https://petition.parliament.uk/petitions/659071/
Canadian Petition: https://www.ourcommons.ca/petitions/en/Petition/Details?Petition=e-4965
https://stopkillinggames.com
Running a Gigabyte U4UD, been having battery problems for months now, and the battery health only reports 50% capacity. Started playing Battlefront and got distracted and saw my battery looks like this now. Been doing this for 15 min, so either my battery is magical... or the Clevo design is flawed. Seeing how long she goes for on battery before it just dies.
I am not looking for tech support, just thought this would be funny.
Plz ignore the dust, I've tried to clean it. Need more powerful air compressor/vacuum.
I am happy I could still get it in red 😋
Original RAM was Ballistix Sport LT 16GB Kit (8GBx2) DDR4 2400 MT/s (PC4-19200), while my new sticks are TeamGroup T-FORCE VULCAN Z 32GB (2x16GB) DDR4 3600MHz CL18.
The other reason is because I got the Kobo Clara 2e to make a e-reader case for it, which I did. And now I don't need it any more, but I'd like a stand in for it just in case, I need to test fit and finish.
Now I can sell my old 2e!
If you too need a Kobo Clara 2e stand in... for whatever reason. You can download them here
Thingiverse: https://www.thingiverse.com/thing:6577515
Printables: https://www.printables.com/model/842520
I am happy with how it turned out even if it's messy!
So a couple of weeks ago, I made this post asking for help from those who used Linux and Davinci Resolve, and their experience. To those who's response was effectively "I use arch btw", I hear you, but that wasn't the question I wanted to ask.
The TL:DR of the responses I got from my last post was
- Pick the Distro with the DE I wanted
- Installing Nvidia Drivers in Fedora is a "fun" experience
- Arch will work if all else fails, but Debain/Ubuntu has community projects to make Resolve work too.
So with a plan in hand, am because Windows is really annoying me with it's bugs. I decided to swap my 1TB Windows drive out, with a spare 512GB SSD to test Linux to see if I can actually use it.
My Hardware:
- Ryzen 5 1600x
- Nvidia RTX 3050 8GB
- 16GB DDR4
- 512GB Nvme
- 4TB HDD (Personal Storage)
- 8TB HDD (Work Storage)
My Linux Requirements
- Minimal Terminal usage outside of onetime installs
- The Ability to use and install Davinci Resolve Studio from my Work Storage
- The Ability to install and run Steam and Wine (Lutris/Bottles)
- Cinnamon Desktop (best of Gnome with the Window layout I desire)
- Minimal configuration to use, should be good to go out of the box with minor tweaking
The OS's I tested (in-order of installation)
- Linux Mint DE
- OpenSuse
- Fedora
DebainDebian- Linux Mint
The results
----- Linux Mint DE -----
Installing Linux Mint DE was straight forward and easy. The system looked and ran nicely, though the installation of the Nvidia Drivers did require some work, but wasn't too difficult.
Davinci Resolve Studio install and ran fine (though I installed it without the deb tool). It alerted me that I didn't have the nvidia_driver installed. But once it was installed, oh boy was it a fun learning experience. Good News, the "Studio" license means I get access to H.264, yay. Bad News, the "Studio" license doesn't include a license for AAC Audio, and by default all *.mp4 containers are muted. Uggh. MainConcept has a plugin that might work, but I've yet to test it.
What I did test was the FFMPEG script floating around to copy the h.264 to a mov file and convert/strip the audio to pcm16. I played around and found that H.264 in a MKV container with MP3 audio both worked and resulted in more compressed video files. I like this so I made a script, called it a day and installed some games.
Currently I am playing Hogwarts Legacy, a pretty new(ish) game that requires beefy hardware. Good test by my books for this, since not only do I play these kinds of games on my desktop, but I remote play them on my TV with my Steam Link. Sadly I never made it far since after the install process ended and I tried to boot the game in Big Picture on my Steam Link, the display manager freaked out and the desktop started flickering in and out of Big Picture. Yikes I didn't sign up for this seizure inducing mess.
But this kind of bugginess was a given with Mint DE, as the goal of Mint DE was to "... deliver the same user experience if Ubuntu was ever to disappear. ". Thus the focus and resources weren't there for issues like this.
If I had the time and desire it might be worth experimenting with it more, but as this fails a requirement (3), onto the next Distro.
----- OpenSuse -----
I love the idea of enterprise Linux, and OpenSuse sound perfect for my use case. But the last time I used it, by DE of choice was plasma, and during my install I forgot that OpenSuse doesn't come with Cinnamon by default. No matter I can just choose the Generic desktop and add it in myself... right?
Well 30 min later and my desktop looked like a Picasso Painting. I don't know how I got here, and I fear if I was to try again, I wouldn't be able to recreate it. Sorry OpenSuse, I couldn't even give you fair shake down, but you fail my requirements (4&5) before I could check the rest.
----- Fedora -----
I had high hopes for Fedora. Not only is this the upstream of the recommended Distro for Resolve (Rocky Linux), but it's also the basis for many Steam OS like distros so gaming should be good on it. I was nervous about the Nvidia driver install, but it can't be that bad right?
Welp finding a Spin of Fedora with Cinnamon was easy enough, and the install is as painless as ever. I like DNF Dragon, but prefer a proper GUI, so Gnome Software here we go.
Man I forgot how agonizingly slow DNF is, and I wish they made DNF5 the standard now. Too bad I didn't find out about DNF5 until after this, but 1 set of updates and package installs later and it's time for the Nvidia driver install. Which, yikes, no "nividia_driver" package on the Gnome Software, nor DNF Dragon. Just an AKMod driver.
Fine, lets go onto google and find a script. Which I did easy enough., But when I installed it via DNF, it broke my entire distro. The driver install, but the kernel module isn't working and errors out. Thankfully I have access to a terminal, but yikes, nothing I do works, and on a machine without a TPM or secure boot, I don't think it's that Reddit.
KK that's fine, I can install the driver from Nvidia itself and install it that way. Lets re-install my distro and try again. Take 2 and the driver installation works, but now there is this ugly grey screen slowing down my boot, and when I install Resolve... it doesn't see my GPU. Fine lets make sure CUDA is install and.... still nothing, and the Nvidia driver is still broken...
IBM/Fedora Project, get your stupid heads out of your stupid buts and give us proper verified access to Proprietary drivers. Cuz your distro fails all of my requirements except (4), and I wasted a day. When people point to say that Linux is too difficult to use, this is the distro they are referring to. NEXT!
----- Debian -----
Ah back to familiar territory. Mint DE had issues, but Debian should be fine. It's upstream Ubuntu and everything supports it right?
Well after 3 install attempts to get GRUB to work. First was my fault and the second time I don't know what happened, I just kept pressing enter hoping that it'll work. I installed everything set Cinnamon as my DE, and OMG what did they do to you my sweet summer child.
Where's the theme control? Where's my ability to force apps to dark mode? Where's Papirus Icons? Are they safe?
It's OK, I can spend a bit of time styling as I install things, like steam... which isn't in Gnome Software. Uggh I need to enable "Non-free" in settings. At this point I'm just happy it's a toggle. But I'm starting to not like Gnome Software. It's slow unresponsive and very touchy.
But with everything install, it's time for the nvidia drivers. And a Debian guide and terminal later (points marked down), they are installed. And things seem to work. I even tried that MakeResolveDeb program, and while she takes a minute, it's worth the wait.
And Resolve does work, but my MKV MP3 clever work around doesn't work? Maybe Mint DE installs some extra codecs for me. Oh well updating the script back to pcm16 fixes it, but I really need to find a proper solution to that. Otherwise Resolve works well enough.
Steam though.... sadly does not. I don't know if it's because I am in Debian, or because it was the flatpak version. But I couldn't even boot into LEGO Star Wars. And with how Cinnamon is slowly turning into a Picasso Painting like Fedora, I feel it's time to bail. Good new I made my Mint installer with Etcher in my Debian install. It was nice.
----- Linux Mint -----
When I hear that modern linux has improved to the point anyone could use it. Mint is the experience I think of when I hear it. Not only was the install process painless. It may have killed my previous Manjaro install on my laptop with it's bootloader malarkey, but with my Windows Drive not plugged in, I had nothing to worry about.
Booting it up for the first time, not only was it nice and friendly, but the welcome guide was perfect to setup my machine, offering codecs I was missing. Setting up backups, themes (papirus I missed you), and even gasp, install my nvidia driver right on boot, with options for which version I can use.
This is what I am talking about for ease of installation. A+++ Mint team, please do this for DE as well when you have the chance... or just merge the projects, up to you.
Setting up Resolve on the other hand, yeah that wasn't so easy. Don't get me wrong the challenge before was getting Nvidia installed, but this time the MakeResolveDeb program ran like a asthmatic pickup truck, and took far too long. I actually timed it, 25 min in Debian, about 45-1hour in Mint. No clue why.
So as I waited, I played some games, and boy howdy can she game. Why do I know this. Well Mint is on my laptop and is my goto to try games to see if they work in a 13th gen mobile i5, before setting them up in Windows.
Hogwarts Legacy booted fine, though shader compilation was annoying especially with the double whammy when the game boots with it too. But hey I'd rather be complaining about game performance and load time than the OS, so this is a win here. And no issues with LEGO Star Wars as well.
Now onto Resolve and.... I've apparently used the maximum amount of authentications for my license and I need to wait week. Drat. But hey it should work on paper since it worked in both Mint DE and Debian.... I just really want to try it, especially since MainConcept has a codec plugin for davinci resolve which is suppose to support AAC. It's $100 but if it works, I'd take it.
----- Conclusion -----
At the end of my Test I had my answer, if I wanted to Game and do Work, I need Ubuntu/Linux Mint. Debian appears to just do Work, while Fedora can find a hole and die in it for the amount of wasted time with DNF and Nvidia installations.
I wish I could've given OpenSuse a bit more of a chance, but no Cinnamon by default no go. And I am sure Arch would've work, I am just happy I didn't need to go down that rabbit hole.
While I would like to say that I closed my desktop up and am riding in the sunset with Mint, sadly that's not the case. Windows 10 refuses to work as an external OS running from USB, and I have ongoing projects there. So one last swap and My desktop is back on Windows.
With that said, my Mint install will work as an external USB, which is excellent since this will be a perfect way to both do a long term test with Mint, and slowly Migrate over from Windows to Linux. In fact I am writing this on Mint right now. Sure it's load times are slow, but I can easily use my internal HDD for work and it won't impact my Windows. Win/Win for me.
Though in the long term I need to do some more testing. FreeCAD and Handbrake are running better, but I need to make sure Resolve doesn't miss behave and the games and accessories I have work well. But I need actual projects to test and right now that work can be done on my laptop.
I'm just happy everything works (for now), and hopeful this transition doesn't go too long. But you know what they say, there's no more permanent of a solution than a temporary fix.
TL:DR I tried many distros, OpenSuse didn't have cinnamon, Fedora broke twice installing nvidia driver, Debian/Mint DE worked but games were wonky, and Mint worked for everything, but I ran out of Resolve Activation so I presume if it worked on Debian it'll be fine here.
the16bitgamer @lemmy.world I run 16 Bit Virtual Studios. You can find more reviews from me on YouTube youtube.com/@16bitvirtual or other social media @16bitvirtual, and we sell our 3D Printed stuff on 16bitstore.com