I added some swear words as contact names, this is one way to get around the fucking censorship
I’ll believe it when I see it!
Yes
Does mean that the unvaccinated anti-vaxers will keep away from the vaccinated??
At least one cat 6 ethernet in each room. Multiple outlets in any media room. One of my old houses had speaker jacks in each corner of the room which was a godsend when setting up surround sound for a home cinema setup.
Copse was my initial thought, but there is also the word Spinney.
Here’s a Piped link to the video in the article:
Puttanesca or risotto. Both relatively easy to make, tale about 40 mins and are delicious!
I guess I’ve been looking at it wrong the whole time! Although, living in the countryside would be preferable for moustache-rainwater
I appreciate the usefulness of my eyebrows to divert rain away from my eyes. I do not appreciate my moustache’s water gathering properties when walking in humid environments.
Surprisingly this chair has come out highly in reviews when compared to 4 figure chairs. I have it and can say it is very comfortable. It’s not going to be the best of the best, however if your budget doesn’t stretch to more than mid-3 figures this could be a good alternative.
https://www.ikea.com/gb/en/p/markus-office-chair-vissle-dark-grey-30261152/
I’m pretty sure I’d be ok in multiple realities
So if you’ve had chickenpox your predisposed, not immune?
This iOS app does that automatically, for the UK at least.
I just do a moustache as my beard doesn’t grow very thick.
Listen, really listen to them. Put yourself in their position and really empathise with them. Remember and reaffirm regularly that you are a team and that you both have the others interests at heart, you should be one unit against the world.
If you get mad or argue, apologise, it doesn’t matter who is right, you’re apologising for upsetting them.
Do things together, and separately, share your experiences.
Try and eat facing each other when you can, with all the screens around it can really be easy to forget that face to face contact.
Never go to sleep with unresolved issues, don’t be afraid to be honest about why you are upset, and make them feel comfortable doing the same.
A lot less than I would like. My best friends maybe once a month or two, other friends once or twice a year. In my twenties we would all see each other a few times a week. People have moved to different cities, had families or are generally to tired from work or have lots of commitments. Also, covid really fucked the routine of seeing friends often. It definitely made me more reclusive.
Yeh, again I’m not sure how efficient using water is but my instinct says it will be a lot better than any mechanical system as they are generally very inefficient!
I’m going to preface this by saying, all I know is that know about the subject was one physics class in college… The teacher mentioned Hydro Pump Storage that pumps water into a reservoir when there is an excess of energy generation then releases it through turbines when there is a surge is energy needs on the grid. Wouldn’t this idea work in a very similar way? If so it would seem feasible as about 15% of the UKs STOR requirements are met in this way.
Nice! Maybe I should post my experiences from turning 40 onwards!
![](https://i.imgur.com/4JDA79D.jpg?thumbnail=1024&format=webp)
https://i.imgur.com/yzJg1ne.jpg
https://i.imgur.com/IgVP7Fj.jpg
Any ideas on this new issue only affecting one of my printers, only seems to be on the bottom layers of a base mode print. The layers that are not done as one continuous spiral. Photos are before and after, ignore the banding on the before! (Thats another issue I have fixed)
Can’t figure this one out, driving me mad as I have orders to fulfil
Solved:
So a combination of three changes finally got me back the correct result.
- Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
- Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
- Reduced the temp by 10°C apart from the first layer.
Normally slopes on my prints look fine, but recently I’ve been getting bad extrusion on some prints but not all. Same materials, same print file. Could this be one of the motors starting to fail? Printed on an ender 3.
Edit: so changing the POM wheels did nothing. However, I did notice while printing the layers weren’t cooling as much as they should before the next layer started. So maybe there could be a fan issue.
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like jamidodger99.
![I love cat](https://lemdro.id/pictrs/image/d056a05c-f865-495d-8b00-ca5b3cafd82b.jpeg?format=webp&thumbnail=256)