I've had my eye on a 240hz 1440p OLED. A while ago you could only find them around $1k, now I can find them starting at $700. Not sure if prices have dropped similarly for ones with other specs.
I am waiting for a 4K monitor at least 120fps, that has proper DP 2.1 support. It is ridiculous that even today most of those monitors are coming with DP 1.4.
You'll have to wait for a new generation of graphics cards to actually get 4k@240Hz without DSC, because while the monitor supports it, the only graphics cards that even have DP2.1 right now don't actually support the required UHBR20
The DP1.4a supports maximum 4K at 120fps, everything above that is using DSC (display stream compression).and if I am not wrong adds a bit of latency and a bit of processing overhead, because your GPU has to compress the frames. Additionally the compression adds some loss to the equation, but according to reports it is very hard to distinguish it from the lossless picture.
It is not a big deal but it is nice to have support for DpP2.1. DP2.1 has more than double the bandwidth of DP1.4a, meaning that it supports 4K 240fps, introduces FEC (forward error correction) and improves the HDR quality.
The bottom line is that if I shed north of 1K I would like to get something which is future proof.
I like the contrast of OLEDs, but one caveat -- my understanding is that if one uses Freesync/Gsync/variable refresh rate/adaptive sync, they are very prone to brightness flickering.
That may or may not be a concern, but something to maybe keep an eye on if you're thinking about getting one and intend to use that feature.
streaming devices are fairly aggressive about sleeping/ power down
there’s only so many hours to watch TV
most video has a lot of dark
Those are great features to combat burnin and save energy, and no big deal on my TV. However those would be aggravating on a monitor I’m trying to work at, plus most of the monitor is bright
Pixels are dying on my LG OLED TV in under 5 years, that's a common issue, i'm fine with it watching media, but desktop usage use the whole picture and that shit would be thrown out.
On the one hand, I agree with you that the expected lifespan of current OLED tech doesn't align with my expectation of monitor life... But on the other hand, I tend to use my monitors until the backlight gives out or some layer or other in the panel stackup shits the bed, and I haven't yet had an LCD make it past the decade mark.
In my opinion OLED is just fine for phone displays and TVs, which aren't expected to be lit 24/7 and don't have lots of fixed UI elements. Between my WFH job and hobby use, though, my PC screens are on about 10 hours a day on average, with the screen displaying one of a handful of programs with fixed, high contrast user interfaces. That's gonna put an OLED panel through the wringer in quite a bit less time than I have become used to using my LCDs, and that's not acceptable to me.
I think a lot of modern OLED panels will do a pixel shift if they detect a static image for too long. I never notice it on my TV, but might be more noticable on a monitor that you are closer to.
I don't like the fact that QDOLED seems to always have shiny panels. I get that it lets the colors pop more and whatever, but I'm not sitting in a dark room. It's usually well-lit, and no I don't want to change that. I enjoy the sun shining and I also enjoy some artificial lighting in the afternoon.
So it seems it's WOLED what I'm looking for, which seems to have matte/diffusing panels mostly.
Fullscreen brightness on either QDOLED or WOLED seems to be pretty meh at best though.
What I also don't like, even though this isn't exclusive to OLED monitors, is the missing continuity in resolution coming from a 27" 2560x1440 monitor, which has been a standard for many years. Most 4KUHD "gaming" displays are around 31.5" so if you'd want to get the same amount of real estate per physical inch you'd have to set scaling to 1.2-1.25x. Fractional scaling can already look bad at 1.5x, so this is a mess.
In an ideal world (or in my ideal world at least) there'd be "5K" (5120x2880) 27" panels as standard (I know they exist, but not as high refresh rate panels), so you could replace your 2560x1440 27", use non-fractional 2x scaling and have content at the exact same size as before. Larger panels could still exist, but they'd be closer to a "6K" resolution with the exact same pixel density.
It makes a lot of sense for non-gaming tasks. Text looks great and non-fractional scaling makes a big difference. Try it for yourself, there are several non-"gaming" (60 Hz) 27" 5KUHD monitors out there. And remember just because you can't notice a difference doesn't mean no one can.
And for gaming: most GPUs can't drive most games at native 4KUHD. Some form of temporal upscaling (DLSS, XeSS, FSR, TAA etc.) is usually required anyway, and whether you're upscaling to 4KUHD or 5KUHD from the same internal resolution doesn't have a big performance impact.
Do you use it in dark mode with a completely black background and white text? You get pretty nasty retinal afterimages from closely clustered bright spots like that, and can make the center of your vision blurry/hazy for a few seconds to minutes. It's a harmless temporary effect, but can be a minor annoyance.
I use dark mode, but I turned on the night light feature and at some point, I think I adjusted the black down so it wasn't so black?
It's so bad that I can't use my phone for more than a few minutes at a time because I can't do anything else after that. My eyes are so blurry I don't feel safe driving.