I've been working on a raspberry pi based music notes box for shows on and off for about 5 years. I can count through and change songs with my foot, so I have an easier time keeping track of where I am in the song for live shows (I'm the bassist). I did all the programming and hardware stuff.
My kids. It's been more than 26 years.
Mostly just bugfixes and maintenance now.
This project technically started in 2009, as part of another project called Dandelion (which then was renamed to Pines), then around 2014 I pulled it out into its own project, Nymph. I worked on it on and off, until 2021, when I rewrote it for Node.js as Nymph.js.
It now runs my email service, https://port87.com/
Here's the oldest code I can find on GitHub from July 7, 2009:
And here's the first version as its own project from Sep 8, 2014:
https://github.com/sciactive/nymph/tree/fdf5f770da7e5acc6938debbaeb8c09cfd080e15/src
My YouTube channel. Been at it for 10 years, haven't even broken through the 100,000 subscribers ceiling yet. But it's fun, so I keep doing it.
I'll bite, what do you youtube about?
Myself, and god is it a mess of a project
I've been composing an orchestra piece for slightly over two years now. I'm kind of learning how to do that as I go along, having only really written songs for up to three instruments beforehand.
I maintain a handful of RimWorld mods, going on about 6 years now. They're in a pretty stable and mature place so they don't take too up much effort, but I do check for Steam commens a few times a day, to make sure nobody found any bugs or major issues.
Sincerely, thank you for what you do!! Mod authors like you are why this game has been so awesome for the past 10 years (I miss those email links to the new game version download).
I've only been around since the alpha 17 days, but I have to agree, it's such an amazing community to be a part of!
What RimWorld mods have you produced? Links plz!
I'm not sure I could say I'm the sole producer, most of my mods are cases where the original author has stepped away from modding and I saw an opportunity to add some improvements of my own while carrying on the torch (I stand on the shoulders of giants and all). I think I'm most known for Camping Stuff and Snowy Trees, since those are the mods that I started with, but I've since adopted a few more, but if you're interested in the full list, here's my Steam / GitHub
My homelab is probably the longest running, but it runs things that I depend on, so I can't say it's much of a side project.
Probably Tesseract since I absolutely figured my interest would have fizzled out long ago.
Definitely my homelab as well. What started as a single AMD freenas server 10 years ago has spawned into a full rack in the past few months that I will soon be operating my business from, as well as personal self hosting.
Classic luxury car restore for about a decade.
How goes it?
One complete rear spring is off for about 6 months.
Everything is expensive and hard to work on. Lots of parts are unobtainable.
When my parents first moved in to my childhood home in the mid-'80s, the 6-acre property was wide-open fields next to plowed farm land, with a handful of freshly planted trees scattered around the property. I loved to run and play across all the open land as a child.
When I was really young, my dad decided to let sections of our 6-acre plot of land go back to nature, because he didn't have the time nor energy to care for it all.
When I was old enough to use our riding mower by myself, (around 10 years old) I made it a personal goal to reclaim some of the land. Which got me in trouble every time my dad caught me mowing down the tall grass. But apparently, my mother was also upset about the lost lawn. When my dad wasn't home, she would go out and trim back the overgrowth so we had some semblance of lawn around the house.
When I turned 18, I joined the military and left home. About a decade into my service, my parents divorced and my mom moved out. When I retired from the service after 20 years served, my wife and I moved back in with my dad.
It turns out that my dad spent the past decade ignoring large chunks of the lawn. I came home to a literal forest on the property, where trimmed lawn and open grassy fields used to be. My dad was old and suffering from Parkinson's Disease, so he wasn't able to mow much anymore and pretty much gave up on the lawn. I did my best to keep it trim around the house, then I started cutting back overgrowth and the new trees forming in the yard.
It's been almost 3 years since I moved back in. My dad passed away almost a year ago and I inherited my childhood home from him. I'm still spending my summers cutting back overgrowth and trimming/removing trees. This will probably take me another decade by myself to reclaim the land, but I intend to turn it back into a beautifully manicured property instead of the tangled, overgrown nightmare my dad left it to become.
I started 30 years ago on this side project and I'm still going today.
I just made a major step on one. I’ve been collecting small electronics of all sorts over the last 15 years or so, a lot of them pretty obscure. I just got a computer I wanted to use to build an inventory of everything and start a YouTube channel to highlight each item in the collection.
Good luck with it. Retro game corps does a decent overview of his setup which would probably help someone starting out. Pretty fascinating watch actually.
What's your Youtube channel name?
Same as my username here. I don’t have any voiced/edited content yet. I hope to have my first one done by end of January.
I've been working on a game reminiscent of Streets of Rage and Paper Mario. A beat-me-up RPG in Unity but I haven't worked on It in a while due to work and burnout.
I've been building a media collection for over a decade and a half at this point. I have a bit of the original stuff, mainly music, from back then but I lost most of my collection a couple of times to drive crashes before I understood what backups were.
I don't have side projects because it's hard enough to simply get up for work 5 days a week.
I created a self hostable plattform for managing and fulfilling wishes but haven't been able to give it the maintenance it needs. I occasionally work on it but wish I had more time/money to work on it more: https://wishthis.online/
When I was in high school (like 2001 or so) I started doing electronics stuff, hobby projects, console mods, etc. simple stuff at first like installing mod chips and building rgb mods for older rf consoles but then building pic and embedded stuff which was somewhat impressive in the pre arduino days (even though it was functionally the same thing, just slightly more difficult because there wasn’t a dev board or ide)
That led to learning enough to fix stuff, which I did through college to earn some cash. I kept doing it, and kept doing it.
At one point I was actually earning quite a bit of money. The early smartphone days were great. Lasted a decent clip too. Each iphone generation I would buy a 50 pack of screens and batteries from chinese wholesalers that sold very good quality ones. Would easily burn through those. I didn’t really like doing this but it was lucrative. I simply charged less then anyone else in town and still made a decent amount per hour because it was ultimately stupid easy to do and all the repair shops (including apple) grossly overcharged. I would do it for $50 and the parts were like $17. Took me like 12 minutes. I was just doing it after work and making an extra 15k a year at the peak just off phones
Then the oled phones came out and all of a sudden parts were like $200, so that sucked, so that dropped drastically
Then the iphone xs came out and if you changed the parts the phone would give a nag screen saying “these parts may not be authentic” and disable features, even if I pulled the parts from another iphone. This also caused another drop although eventually I found programmers from china that could defeat it (for $$$ but at that point it was about the principle)
Then Samsung started doing it too (though they later walked it back, but then unwalked it back maybe? I don’t pay it much mind these days. For that matter apple also finally allows you to program new parts as of ios 18 but they have to be genuine apple parts that aren’t locked and buying them from apple is $$$$$. Plus last I checked they won’t even sell you parts unless you give them the device imei/serial so you can’t buy in bulk, get discounts, and doing what I did is completely impractical)
Then I gave up on that. I still do some of what I always did: buy broken stuff, fix it, sell it online. This is more fun to do because it’s interesting, like solving a puzzle, but less lucrative because it’s far more time consuming. I also no longer have to directly deal with customers which is nice (aside from the occasional person on ebay who wants a refund without returning the item because I didn’t make it clear the item was refurbished even though it was listed as refurbished, the description says it’s refurbished with a description of how it was refurbished, and an image saying “refurbished item” as the primary picture on the auction).
I also sometimes do hdmi and usb c replacements on consoles and phones because they don’t serialize those (yet, probably)
And every once in a while I still pursue an actual hobby project. My current one is making a proper portable Dreamcast but instead of doing it based on a raspberry pi or whatever I’m using the leaked schematics to rebuild the board with only the necessities in a much smaller footprint and trying to integrate some modern niceties (replace the disk drive with either sd card or cf, modern efficient power supply, built in VMU, etc). But it would sacrifice an actual Dreamcast and reuse the cpu, gpu, ram, Yamaha sound chip, etc so it wouldn’t emulate anything and be 100% accurate. About 80% to a prototype but progress is slow (been doing it for years) because I do have an actual job that takes up much of my time. Also I lost some enthusiasm because someone in china beat me to it years ago; you can buy it on AliExpress for like $500 if you really want one (but theirs is ugly and doesn’t have a lot of the feature set I plan. It does exist though, so it beats mine quite handily)
I've been working on my 3D printed Mini Macro Pad for a couple years now, slowly making improvements over time.
I've been trying to make a lego golf playing automaton for about three years, and I keep running into issues with the system that brings balls up from inside of the model to the surface, and keep having to completely redesign the mechanism. I'm now starting on my fourth redesign.
I'm getting my ass kicked by trying to recreate a pop tube kids toy using 3d printing so that I can use the bistable mechanism elsewhere in headphones pads. I could probably do it in a horizontal orientation, but I want vertical, and everything turns into a spring so far, so I feel ya ATM. Those little details are such a pain. I'm on FreeCAD file 2, body 7, and just swapped my typical 0.6mm nozzle for a 0.25mm... We're gettin serious now!
For decades I've been dreaming of my own PHP framework because the existing stuff seems to be too clunky, with too much repetitions and not close enough to best practises. By now I have something that theoretically works but I haven't had enough time to flesh it out.
By now I'm disabled and don't have the brain capacity to keep working on it.
This is one of my greatest fears.
I'm sorry, nobody should have to go through what you're going through.
Fiction writing. I started when I was very young, it's by far my most long-runbing hobby.
You should join one of the writing communities on Lemmy and post one of your stories. What do you have to lose?
FeedTheMonkey https://github.com/jeena/FeedTheMonkey
A very simple river of news style RSS reader desktop frontend for TinyTinyRSS
The .gitignore file there has been created 10 years ago and I am still using it, but only seldom update it, but still.
Does relearning how to read sheet music and basic chord shapes on the guitar every other year count? One day I’ll figure it out.
My bedroom electronics maker lab setup probably qualifies. I've rewired LED's and added some printed wire guides for my laptop stand's Ethernet cable. I also hung my SMD parts bins, and built shelves for my DMM and scope. I started that around 6 months after I was disabled, so 10 years ago.
There's a story or stories that's been going on for the fourth year in my mind. The plot(s) is massive and well-thought-out but everything is riddled with holes in the middle, to the extent where I could not attempt to write it down without it being as disorganized as my thoughts (and, to be honest, clutter in my mind is easier to handle than clutter on the drawing board). Such is the life of a writer/artist, though I recently reduced the load immensely by inventing new mediums.
Planet Piss /s
