It's bent out of shape; you need to install flatpak
118 1 ReplyIt came with snap and the user snapped.
42 0 Replysomeone got it nixed
10 0 Reply
Ctrl + Z
42 0 ReplyThanks that worked
50 0 ReplyI'd say that one got a little too much Ctrl+Z
3 0 Reply
/sfc scannow
41 0 Replydism /online /cleanup-image /restorehealth
22 0 ReplyNow we just need
reboot in safe mode
andreset windows
and we have the four horsemen of Microsoft support forums9 0 Reply
Could not recreate issue.
Closing ticket.
32 0 ReplyIts just compressed.
Tar -xzv
28 0 Replyachsully tar is store only, not compression. Use zstd, xz, rz for good compression 🤓
3 1 ReplyAre you sure?
-x extract -z unzip -v verbose
I could be wrong here.
3 0 Reply
Have you tried turning it off and turning it on again?
44 1 Replyput it in rice overnight
39 1 ReplyHave you tried putting it in rice?
17 0 ReplyAt this point you are putting rice in it not the other way around.
1 0 Reply
It's HP... No hope.
Oh, and it's a tad bent.
31 0 ReplyThat new Tesla Cyber Laptop looks difficult to use.
18 0 ReplyAnger management
3 0 ReplyInstall debian it runs on even the lowest resources
23 0 ReplyIf Debian is too heavy, try puppy Linux for even lower resource usage and because puppies are cute.
12 0 Replytiny core
1 0 Reply
Sell to art museum and buy a new one for the money
15 0 ReplyI would like 4 money for this art please!
2 0 Reply
-
Try to sell it as art
-
Make a shitton of cash
-
Buy a new laptop and still have a shitton of cash
(maybe remove SSDs and HDDs before step 1 if those are still in tact and depending on what kind of information was stored on the device)
2 0 ReplyGenius just paint it
3 0 Reply
-
I've seen Linux fix worse cases.
Ever try mint?
10 0 ReplyCosmetic damage, no lowballers, $1000 firm, I know what I have!
14 0 ReplyTry some WD-40
11 0 ReplyHave you tried forcing an unexpected reboot?
11 0 ReplyThe most important part is making sure the computer doesn't see it coming so it's truly unexpected
6 0 Reply"helloo, I.T." "Have you tried turning it off and back on again?"
5 0 Reply
Have you tried ironing out the wrinkles?
13 1 ReplyYou’ll need a DeLorean and some plutonium.
10 0 ReplyYou gotta download more ram. I'll fetch you a link... brb
7 0 Replyyou can actually connect to online ram, but it will be slow and potentionally unsecure if you don't secure it. This is how cloud gaming works
2 0 Reply
Have you tried turning it off and then on again?
5 0 ReplyPatent that shape. Call it ergo 2 electric boogaloo, buy a non ergo 2 model
7 0 ReplyPartial updating is not supported. Please reinstall Arch.
5 0 Replyon arch, it will display gibberish that somehow means that you need to reprogram the firmware externally, then shuts down permanently
1 0 Reply
Iron, no steam.
5 0 Replyif it boots up, ram, storage, video adapter, cpu, and usb slot is intact then propably yes
2 0 ReplyDisassemble entirely, hammer shell back into shape. If shell can't be salvaged, buy a mid tower and a CPU cooler. Desolder CPU, GPU, and RAM. Disconnect SSD and fans. Resolder chips back onto new motherboard. Replace display, keyboard, and touchpad. Put everything else back together.
Laptop fixed/laptop is now desktop.
1 0 Replyit costs more than buying a new one at this point
0 0 Reply
I was issued an Elitebook for work. This is truly the best case scenario
5 0 ReplyHow much force is required to do that to a *laptop? Car accident level?
6 0 Replynot a lot if it doesn't have a metal frame inside
4 0 Reply
Just grab a mallet amd hammer it flat again
5 0 ReplyJust wipe it down with a damp cloth (not dripping, just damp). It'll be as good as new.
4 0 Replyfdisk
5 0 Replyremove snapd
3 0 ReplyI don't know, what's wrong with it?
3 0 ReplyHeat press
3 0 ReplyNow, that’s a bit much. With a small blowtorch aimed carefully, you can soften the case and bend it back in shape.
2 0 ReplyI went for ease.
1 0 Reply
That’s what you get for not upgrading to 11
3 0 ReplyA little distilled white vinegar, a lint-free cloth, and some elbow grease.
3 0 ReplyWell, first, you want to get a hammer. Make sure you're comfortable with the weight, you're gonna be doing a lot of swinging.
Next, you'll want this hunk of metal called a dolly.
Now, if you're someone without experience in a body shop, I'd recommend searching "Dolly dent removal methods", watch some tutorials.
If you're familiar already, you know what comes next. Decide if you're going on or off, and beat the shit out of it until the dents come out.
3 0 ReplyIt is. Permanently.
2 0 ReplyMicrowave it, then buy a new one.
1 0 ReplyJust iron it out. Should be fine.
1 0 ReplyJust leave it in river over night, it'll be fine...
1 0 ReplyLaptop, Poltergeist edition.
1 0 ReplyGive it to this guy
1 0 ReplyThat's more of a louis rossman kind of job
1 0 Reply
the same way that sysadmins have been doing it since 1995: take out the harddrive and put it in a new identical machine and then charge their department for the replacement while simultaneously using the contract to get another one for free.
it's my own mini version of sticking it to capitalist system. lol
1 0 Reply