There are a few ways to do it, but you don't use caddy for SSH.
- host SSH on port 22, forgejo on a different port. Expose both ports to the internet
- host SSH on a different port, forgejo on port 22. Expose both ports to the internet
- host SSH on port 22. Forgejo on port 2222. Only 22 exposed to the internet. Change the authorized_keys user of the git user on host to automatically call the internal forgejo SSH app
Last option is how I run my Gitea instance, authorized keys is managed by gitea so you don't really need to do anything high maintenance.
~git/.ssh/authorized_keys:
command="/usr/local/bin/gitea --config=/data/gitea/conf/app.ini serv key-9",no-port-forwarding,no-X11-forwarding,no-agent-forwarding,no-pty,no-user-rc,restrict ssh-rsa PUBLICKEYHASH
/usr/local/bin/gitea:
ssh -p 2222 -o StrictHostKeyChecking=no git@127.0.0.14 "SSH_ORIGINAL_COMMAND=\"$SSH_ORIGINAL_COMMAND\" $0 $@"
127.0.0.14 is the local git docker access where I expose the service, but you couldn't different ports, IPS, etc.
Damn.. You too?
That has not been my experience... amdgpindriver was crashing quite often, gfx ring 0 timeout. Tons of people with that problem forums. I managed to adjust some parameters and fix it eventually.
VRR doesn't work properly, I can get it to work, burnout is a shore every time.
I have both and nvidia and an amd GPU, and with xwayland fixed, the nvidia one can run just as well.
That said, paying 2k for a GPU to have raytracing and 24gb of RAM isn't that attractive.
Hello fellow homelabber
distcc so you can compile on the faster ones and distribute it
Nerfing things on a PVE game that's supposed to be fun shows a lack of creativity.
You can buff the other things while finding better ways to increase the difficulty, instead of just boosting health and throwing more enemies, but that's the "easy" button.
I think you meant no data cap.
The right thing to whom? Shareholders? (=
It hasn't crashed yet, but I won't be able to test it for a couple weeks (vacation time \o/).
For normal use, it looks like the crash is resolved or, at least, as stable as 6.7 was. Next test is to play Helldivers 2 with the Vulkan backend and see if it crashes or run.
Powercolor, red devil.
Under 6.7 I was able to find some a combination that was usable for a few days.
With 6.8, timeouts would happen within 30 minutes.
I fiddles with sched_job module option and the system seems stable now.
They still have, I replaced my 3070 with a 7900 xtx and the 7900 is constantly freezing with ring GPU errors and drivers completely effing up the system. I have already replaced it twice, and I am using workarounds to not hit bugs, but they happen every few days...
I can't remember all the details, but depending on the CPU you are running you may need some extra configuration on opnsense.
There were a few issues, on my servers, running on older Intel Xeon CPUs, but I eventually fixed them adding proper flags to deal with different bugs.
Other than that, running on a VM is really handy.
I am usually more worried about the phone being in some blacklist or not, this has always been one of my issues with the used phone market.
On to your question - 32% battery health seems pretty bad. I just replaced my s22 ultra that I used quite heavily for the last 2 years, it is at 86% battery Healthy.
On nvidia, there are still too many edge cases involving Wayland that are just crippled. Orca slicer doesn't work for me for example, you are completely missing any of the 3d accelerated graphics in there.
On the other hand, the AMD 7x00 series have different kind of bugs, with ring0 errors leading to full resets.
I think once nvidia drivers are squared out (the proprietary ones) it will be smooth sailing.
It is nice that you got it running, but when everything you end up doing is running services in low ports or needing specific IP address in different networks, rootless podman is just a PITA.
In my case I have one pihole running on a docker container and another one that runs directly on a VM.
Someone said before "what's the point of running in a container"... Well, there really isn't any measurable overhead and you have the benefit of having a very portable configuration.
I do think the compromises one has to go through for podman rootless are not worth in this case, for me, not even the rootful worked properly (a few years ago), but this is a nice walkthrough for people wanting to understand more.
Let's not talk about HDMI 2.1 with an AMD graphics card either..
It is user friendly, and technically incorrect, since nothing ever lines up with reality when you use 1000 because the underlying system is base 8.
Or you get the weird non-sense all around "my computer has 18.8gb of memory"...
I can't say if you are overstating it but, only mention that I went through a similar path. I had it multiple scripts running and it was a neverending thing.
Since I have moved to small step I never had a problem.
The biggest advantage I got is for products like opnsense, you can do automatic renewal of certificates using your internal CA.
Generating new certs is still as simple (actually much easier for me) than relying on openssl or easyrsa scripts.
What? Every BIOS in the world still uses the same system. Same thing for me on Linux.
Only hard driver manufacturers used a different system to inflate their numbers and pushed a market campaign, a lot of people who didn't even use computers said "oh that makes sense - approved"
People who actually work with computer, memory, CPU, and other components in base 8 just ignores this non-sense of "x1000"