If you do end up trying it, let me know if you run into the issue of the UI constantly "refreshing" while editing and ruining your changes. I'm not sure how widespread the issue is.
You could check out expander card. I use it for a weather section on my dashboard.
https://github.com/Alia5/lovelace-expander-card
Editing the card is really buggy for me and I'm not sure the project is still open, given the note at the bottom about the issue tracker... but after it's configured, the card has been very solid.
I like the expanding room cards. Can you share how you're accomplishing that?
I figured swap would only be used if I ran out of available memory. I'm not an expert at all, so I could be totally wrong about that.
Is it possible that the container is allocating the space preemptively but not actively using it? So proxmox would see it as being used, but plex is simply reserving it. I think I've seen that occur on other containers like home assistant (but this is a VM not LXC). Proxmox says it's using almost all the memory available to it, but going into home assistant itself says it's only using a fraction of that amount.
As much as I hate Twitter, the feature where users can add context would be amazing on other platforms. Would love to see it on Lemmy.
But only some numbers. Apple's, for instance, is net profit from what I can see. Heinz isn't. I haven't looked into any more of them, but they're just inconsistent.
Crappy posts like this bug me so much because it makes "my side" look like we're full of shit. There are mountains of true and verified facts to support the conclusion that workers should be paid more and corporations are ruthlessly greedy.
I took them using remote shutter through WiFi+phone app. The tripod comment was more to be able to frame and get better angles.
It was so much easier than I expected it to be. Essentially automatic. If you try it out, I'd love to see your results.
Thanks!
The vanadinite (red) was 26 photos and the fluorite (green) was 50
I used the focus bracketing mode on my camera. I specify the number of shots to take and how much the focus changes between shots. One shutter press and my camera automatically takes all of the photos and adjusts the focus for me.
And this setup I only put my camera and the rock on a table next to a window. I still need to buy a tripod, but it's hard to justify spending more soon after buying a camera...
Yeah, OM Workspace is the editor you get with Olympus/OM System cameras. Admittedly, I didn't use it very much, but I get the sense it isn't top tier. I'm just so thankful that there are great open source options.
I was very surprised. I searched for a free focus stacking application multiple times with few results and lots of recommendations for paid software. With how little chimpstackr is recommended, I expected poor results, but it did noticeably better than Olympus's own raw editing software.
This was mainly a test of the software for me, but the result came out so much better than I expected. Raw editing in darktable and focused stacked using ChimpStackr, two amazing foss pieces of software.
Shot on an Olympus E-M5 Mark II + 12-40 Pro
The container I run plex on has plenty of spare memory but is still using 100% SWAP. First off, is this an issue I should be concerned with or try to fix? If so, any ideas?
This is the best way. A raspberry pi is way more suited to managing the entire network of devices than turning a relay on and off.
This is a must have for me or I simply don't use the app. An important detail though: it should only mark posts as read if I've scrolled past them! Not any post that can be seen on the screen.
No idea. I'm new to proxmox and Linux by about 2 weeks, so I'm mainly just trying to learn. I figured since the tteck script sets up a LXC, it would be possible, but I can't really find any record of someone else doing it.
No, I have an extra USB drive to test it out.
I've followed this guide after setting up an openmediavault LXC using a tteck script. I want to run this container as unprivileged and haven't been able to get it to see my external USB drive.
Things I've tried:
- Using the actual minor number for the device instead of
* - Using
cgroup2instead ofcgroup - changing
create=filetocreate=dir - A privileged container
Maybe I'm missing a step after following this guide? To check my success, I go into the Storage→Disks section of openmediavault and see that nothing is listed there. Clicking the 'Scan for new devices' icon results in a 500 - Internal Server Error.
Maybe this guide is horribly outdated? It states: "Note: lsusb will not work inside the container because there are no devices there yet" but I am able to install usbutils and lsusb to see all USB devices on my host from within the LXC console.
I'm running omv as a VM currently while I try to figure this out. If I remember correctly, all I had to do was use the proxmox GUI to add the USB device to the VM in the hardware section, then omv was able to see the drive and interact with it just fine.
I updated to V23.09.13-09:43 (92) this morning. I use list view. On all picture posts, I click the thumbnail to open them and get a black screen. I tap to close and open the pic again and it displays normally.
I've tried going into the app settings to force stop and clear the cache and it did not help.
That was my favorite sub, and I'm really sad it didn't take off on lemmy. I noticed it was back up on Reddit a few weeks ago and I thought about messaging you to ask if you put it back or reddit gave it to someone else. Fuck reddit.
For starters, I'm ultra new to proxmox and linux. I have my old PC running proxmox in the corner of my room so I can play around and learn it.
I have my main server (running Windows) sharing an attached hard drive as a samba share for other computers on my network. I can't seem to mount this share in a fresh LXC, but I can in a PlexMediaServer LXC I created using tteck helper scripts. I'll just attach what I'm doing below. Both are using the same container template (Ubuntu 22.04).
Plex LXC
root@plex:~# mkdir -p /mnt/wddrive root@plex:~# mount -t cifs //192.168.1.3/Media /mnt/wddrive -o username=myusername,password=mypassword root@plex:~# ls -la /mnt/wddrive total 73409600 drwxr-xr-x 2 root root 4096 Sep 2 13:48 . drwxr-xr-x 3 root root 4096 Sep 3 13:40 .. -rwxr-xr-x 1 root root 14340 Jul 8 08:15 .DS_Store drwxr-xr-x 2 root root 0 Jul 5 16:50 Books drwxr-xr-x 2 root root 0 Jun 1 14:53 Financial drwxr-xr-x 2 root root 0 Aug 24 08:20 'HOA Documents' drwxr-xr-x 2 root root 0 Aug 26 13:09 Movies -rwxr-xr-x 1 root root 414702 Jul 8 10:37 PXL_20220114_214638675.PORTRAIT.jpg drwxr-xr-x 2 root root 0 Sep 2 13:55 'Plex Lib Files' drwxr-xr-x 2 root root 0 Aug 31 16:32 'TV Shows' -rwxr-xr-x 1 root root 17408 Jul 14 19:42 Thumbs.db -rwxr-xr-x 1 root root 53934080 Aug 31 18:36 com.plexapp.plugins.library.db -rwxr-xr-x 1 root root 420 Mar 15 20:38 'make show folders.bat' -rwxr-xr-x 1 root root 173497 Jul 8 10:28 photo_2023-05-20_20-34-59.jpg -rwxr-xr-x 1 root root 3252 Aug 31 18:41 'plex reg.reg' -rwxr-xr-x 1 root root 53243232462 Nov 27 2022 takeout-20221128T031130Z-001.zip -rwxr-xr-x 1 root root 21873610486 Nov 27 2022 takeout-20221128T031130Z-002.zip root@plex:~#
Fresh LXC Spinup
root@testcontainer:~# mkdir -p /mnt/wddrive root@testcontainer:~# mount -t cifs //192.168.1.3/Media /mnt/wddrive -o username=myusername,password=mypassword mount: /mnt/wddrive: permission denied. root@testcontainer:~# ls -la /mnt/wddrive total 8 drwxr-xr-x 2 root root 4096 Sep 3 20:42 . drwxr-xr-x 3 root root 4096 Sep 3 20:42 .. root@testcontainer:~#
I think it's pretty obvious that I have a problem with permissions on the bare LXC that I don't with whatever that script is going to set up the LXC and install Plex for me. I'd like to be able to mount network shares as easily as this on all my other LXCs as well. Can anyone point me in the right direction?
I have a mini-PC running windows. On that, I run home assistant in virtualbox, have plex installed, and a cheap USB harddrive plugged in to keep my plex media. I've turned on sharing for a folder in this drive so other devices on my network can access it.
I've watched some videos and read some tutorials. I have a pretty good idea on how I'm going to run HA and Plex, but I'm unsure about turning my USB drive into something the rest of my devices can access as well as something Plex can directly access too.
What would you recommend as the most beginner friendly, easy way to accomplish this? I keep seeing TrueNAS pop up, but I'm not convinced this isn't way overkill for what I want to do. So what would you recommend I look at to start out? The amount of information and things I don't know yet is a little overwhelming.
After I get more familiar with the system, I'm totally happy to branch out and try more advanced things that most people prefer, but that's down the road for me now.
Edit: to be clear, I'm planning on completely ditching windows and setting everything back up in proxmox
I never want the next video to automatically play. Videos in playlists specifically automatically go to the next and I cannot find a way to disable this.
Non-playlist videos have an autoplay toggle at the top I can turn off. Videos in playlists don't.
I'm in the US. My wife and I are moving into a new-build community in Feb. next year and they are using these wall controls for the rooms with lights and a fan.
I'm having a little trouble finding a home assistant compatible replacement. The 1-gang width probably limits my options severely. I'm open to converting these to 2-gang, so I'm open to 2-gang devices as well.
Zigbee is is my preference, then WiFi (local only), and I'm not interested in z-wave.
The recent change today that makes hidden posts permanent after a page refresh instead of temporary has seriously bugged the way I browse Lemmy.
Now if I have too many posts hidden, my front page won't even load. I'd really prefer the choice to hide posts I've seen/scrolled past. Can we at least get a toggle to enable the old functionality?