alright so openrgb can indeed see my dz60 board and glorious o mouse. but only the moving effects work on the mouse not static. it used to work. for mydz60 when i toggle led and put it in direct mode i change the key lights it does not reflect.but it does reflect on the board if i change the mode on board itself. but even when i save and load profile the board goes back to being blank and it goes into a mode where whatever keys i press it lights up only then https://youtu.be/wZ1r9UUIBRE?si=6lMHFUYUpiI0ljHQ
ok here is everything it detected:https://imgur.com/a/bwbqiMw it didnt detect thermaltake fans. i also have asrock xtx gpu and x670 steel legend mobo which both have rgb but only the steel legend was detected. the dz60 is my custom board which is fine it alr has custom firmware to work with openrgb. now the corsair commander core only changes the AIO Panel rgb (but not really it still goes back to its original hardware lighting setup from icue) and not the fans connected to it. it does not detect the fans at all all the fans have no light for corsair. thermaltake still keeps its profile from the TT rgb app and openrgb is not detecting it. and it wont detect the asrock taichi 7900xtx gpu. any ideas on whats going on?
and something weird is happening now. first of all when my pc is off my mobo light is blue and my keyboard is saved with the rgb profile. but when i boot up my keyboard does not work so i have to unplug it and plug it back in and then it turns blue too like the mobo. https://imgur.com/a/rOZj82M