Skip Navigation
Chameleon crossing the road [oc]
mastodon.africa Dakspyker (@Dakspyker@mastodon.africa)

Attached: 1 image Chameleon taking a stroll across the road. We had to help him to the other side, lucky for him we saw him in time to stop! #chameleon #knp #southafrica #oc #wildlife

Dakspyker (@Dakspyker@mastodon.africa)
4
Baby Impala, Kruger National Park [oc]
mastodon.africa Dakspyker (@Dakspyker@mastodon.africa)

Attached: 1 image Baby Impala, Kruger National Park. #oc #Kruger #baby #aww #nature #photo #knp #southafrica

Dakspyker (@Dakspyker@mastodon.africa)
1
Boot problem with Kubuntu 23.10
  • I think it is something like this, it looks for something before timing out and moving on to the correct drive. I don't know how to fix it though. I'll start with man journalctl as was suggested elsewhere. Thanks!!

  • Boot problem with Kubuntu 23.10

    Hi all,

    Long story as short as possible:

    Lenovo Ideapad 3. I had windows 11 on SSD. Installed Ubuntu on HDD, dual boot with windows on SSD. Later decided I like Linux, no need for Windows. Installed Kubuntu on the SSD. Worked fine. Manually deleted partitions etc on HDD, made it one big partition for backintime and timeshift to use. All is good.

    Now, when booting the laptop, it will start (I can hear the HDD spin up, and I see the screen come on, but nothing displays) then the laptop switches off, and immediately comes on again as above. This happens three times, on the fourth reboot the system starts normally. I have tried changing every single setting in the BIOS, no difference. I do not know much about grub, it seems OK to me, but the problem is probably there.

    Please, does anybody know what I can do to fix this?

    Thanks!

    Some info below:

    There is a lot of stuff in /boot/grub/grub.cfg, let me know if I should post it.

    johann@sny:~$ grep -v '#' /etc/fstab UUID=53b002cd-053a-43fe-9e73-9db8c9d545cf / ext4 errors=remount-ro 0 1 UUID=9A55-24AD /boot/efi vfat umask=0077 0 1 /swapfile

    Drives: Local Storage: total: 1.82 TiB used: 379.35 GiB (20.4%) ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 tech: SSD serial: fw-rev: 2B4QFXO7 temp: 35.9 C scheme: GPT ID-2: /dev/sda vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: fw-rev: 0E scheme: GPT Partition: ID-1: / size: 915.32 GiB used: 182.67 GiB (20.0%) fs: ext4 dev: /dev/nvme0n1p2 ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1 Swap: ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile

    6
    InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)DA
    Dakspyker @lemmy.world
    Posts 3
    Comments 2