Wireguard with NetworkManager
Wireguard with NetworkManager
Hello guys,
I am losing my mind over this issue:
I am running Endeavour OS on my laptop and I need to connect to my OPNSense through wireguard, but the performance has been terrible, DNS resolution to be precise. I think this is related to a specific configuration to either NetworkManager or openresolv, because the same configuration file works fine on Android or Windows devices.
My suspicions are that because I am using two piholes that are on the same network of the OPNSense router (and I have a few firewall rules redirecting every DNS traffic to them), there is a conflict somewhere. I have also tried to mess around with the MTU size, but to no avail.
Here is my config file:
[Interface] PrivateKey = **************************************** Address = 10.10.10.5/32 DNS = 192.168.0.11, 192.168.0.12 MTU = 1420 [Peer] PublicKey = **************************************** AllowedIPs = 0.0.0.0/0, ::/0, 192.168.0.0/24 Endpoint = ******************:51825
Any ideas? Thank you.