If you have opnsense in front of it all, using a DDNS client to register the public IP would be step one, then using haproxy for an inbound proxy rather than port forwarding the traffic. That way you could have 'owncloud.your.domain' and 'otherservice.your.domain' hosted on the same IP using 80/443 rather than having to forward random ports in.
If this is a question about how to access your server at home from devices anywhere, securely, with a simple setup, then the answer is turn off all that port forwarding, and use Tailscale.
Yesterday I tried installing it on my windows server and it does not run. Like, installation ok, no error, nothing in the sys tray and I can't execute it either
ng a DDNS client to register the public IP would be step one, then using haproxy for an inbound proxy rather than port forwarding the traffic. That way you could have ‘owncloud.your.domain’ and ‘otherservice.your.domain’ hosted on the same IP using 80/443 rather than having to forward random ports in.
I managed to have it run. Horrible the fact that you have to choose between Apple, Microsoft, Google for Tailscale login...
Tailscale would be the most "secure" as you have no ports open and only you can access it. Keep in mind your services will only be accessible by you along as all your devices connect to your tailscale instance. Sharing access is possible but will require some explanation.
Wireguard is another option, just as secure as the first option, it will need one port open but the port only responds if you are connecting with proper keys/authentication. Like tailscale you can only access your services if connected to your wireguard instance.
Reverse Proxy, any version you choose will work, it depends on your preference of layout and user interface. Nginx proxy manager, haproxy, traefik. Each accomplish the same with different levels of setup, I listed them in my ease of use. If you use pfsense as your router haproxy installation is easy and there are plenty of guides about setup. Nginx proxy manager you can also find a bunch of setup videos where it's running on home assistant.
With a reverse proxy you will open port 443 and in your firewall rules point it at your reverse proxy. Your proxy will then direct traffic to any one of your services. You will need a domain name so you can access service1.mydomain.com or service2.mydomain.com from anywhere on the web.
With a reverse proxy and any public website I recommend to run them behind a ddns like CloudFlare. You can do this for free and it helps protect your services against DDoS, bots/crawlers, and it obscures your HomeLab IP, as all incoming traffic goes through CloudFlare and then get directed to your HomeLab.
Additional security that can be implemented within your firewall is to block all traffic not originating from your country, or even only allow specific IP addresses.
I use a combination of all this above where a few services run publicly accessible, and everything else is accessed through tailscale or wireguard. Internally I run haproxy on pfsense where public service are proxied.
I also run nginx proxy manager for my local services, this allows me to access my local services such as service1.local.mydomain.com with a full SSL certificate. So once I connect to my home network with tailscale/wireguard I can type in these domain names into my browser. At some point I will move these into haproxy with its own frontend for internal services.
Tailscale would be the most "secure" as you have no ports open and only you can access it. Keep in mind your services will only be accessible by you along as all your devices connect to your tailscale instance. Sharing access is possible but will require some explanation.
Wireguard is another option, just as secure as the first option, it will need one port open but the port only responds if you are connecting with proper keys/authentication. Like tailscale you can only access your services if connected to your wireguard instance.
I disagree. Tailscale has a much higher attack surface since the network is controlled by a separate entity, tailscale.
As on pure wireguard, you would need to first compromise one of your clients to get into the network.
Also tailscale is a much higher value target since you could compromise thousands of devices/networks/communication with 'just' compromising the vendors network.
You have an excellent point, it seems like tailscale would have a larger attack surface.
I wonder if credentials are hashed in some way on tailscale servers, so even with an attacker gaining access to their servers it would essentially be useless to them.
It has been a while since I setup my wireguard server, if you host it on a linux system It can be easy as:
Install wireguard on your system
generate private/public key
create a wireguard config file with iptables rules
net.ipv4.ip_forward=1 on your server (yeah very important part)
open the wireguard UDP port on your router
configure clients
The first time you delve into, it can be Intimidating (at that time I was a total CLI/linux noob) if you are a beginner, but I think you will easily find your way :)
This tutorial seems rather complete and easy to follow with comments. Also, if you didn't know, do not blindly copy/past the commands from the web directly in your CLI.