I am working on the V1.0 model, PCB's should arrive in a few days. I think the V1.0 release should be good enough for others to make. The current model is nice, but there are a lot of improvements in the pipeline particularly regarding aesthetics.
That's so awesome. In amazed you've put it all out there for others to sell. I'm sure it's going to show up on AliExpress pre-made soon. I'd happily buy this.
Does the Lily58 or Iris fit your needs better then? Or is there something else about this board that trumps those other 2?
The primary difference to me seems to be roller vs rotary encoder and number row. And while I too, prefer rollers over rotary encoders :D... if the number row is critical to your use case those boards seem to be a better option.
It's interesting to see these rollers popping up some more, especially with two posts about them in such a short period of time(https://lemmy.world/post/4760068?scrollToComments=true). They're much better than the normal rotary encoders and I've enjoyed using mine a lot. Though sourcing them is unfortunately a bit tricky (and thus on the more expensive side).
I'm currently making a new board using the Nintendo Switch joysticks to replace them, I'm curious how the two compare.
I have a design I’m tinkering with as an idea that has two 5 way sticks. The actuation force is too high IMO, but I could not find a suitable digital switch.
Are you interfacing to the switch sticks using analog or do you have some nice low power digital solution?
I took some hand measurements and this is what it came out with:
I didn’t add the splay, I started to add it, but decided that in practical terms it likely doesn’t make much difference but it made things quite unwieldy looking.
In practice I’ve found the pinky column needs to drop by about 3-4mm which is a change I have in the newest iteration.
If you’d like I can share the V1.01 files to you too. The improvements are also electrical as well as mechanical (eg some caps to smooth out the rollers). Otherwise I anticipate publishing in about 4ish weeks time.
This is lovely. I'm currently using a lilty58 while leaving the number row empty, and have been looking for a board to downsize to.
I don't feel ready to go down to as low as 42 keys, so the corne is still a bit intimidating.
This? This looks like the Goldilocks medium I need at the moment. 😆
I’ve started assembling V1 today. Which means I can finish the mechanical design this week. I’m looking forwards to having it, I think it’s going to look very nice.