zelifcam @ zelifcam @lemmy.world

Posts

4

Comments

197

Joined

2 yr. ago

If it’s accessible using primary IP on the main system , firewall is set or completely disabled and both client and server are on the same network, then I’m not sure. Unless there’s some kinda of network setting mismatch on the laptop or a configuration in Jellyfin not allowing connections outside the host , then I’m not sure. We did cover the basics, so I’m sorry it’s not working.

Ok. So you’re definitely not trying to use 127.0.0.1 remotely.

So on your phone’s web browser ( using the same WiFi ) if you visit http://

<ip of mint system>

I’ve never used Linux mint, but if it’s Debian based then it might be using UFW firewall.

First, check that if firewall is running. Open a terminal and type:

    
sudo ufw status

  

Step 2: Open ports 8096 and 8097

To allow traffic through ports 8096 and 8097, use the following commands:

    
sudo ufw allow 8096/tcp
sudo ufw allow 8097/tcp

  

This opens both ports for TCP traffic. If you also want to open the ports for UDP traffic, you can use:

    
sudo ufw allow 8096/udp
sudo ufw allow 8097/udp

  

Step 3: Verify the rules

Once you’ve added the rules, you can check the firewall status to verify the changes:

    
sudo ufw status

  

You should see entries for ports 8096 and 8097 allowing TCP (and/or UDP) traffic.

Step 4: Reload firewall (if necessary)

If the changes do not take effect immediately, you may reload the firewall using:

    
sudo ufw reload

  

Now, the firewall should allow traffic through ports 8096 and 8097.

Ok. What address are you using when trying access the server on your phone or Jellyfin client?

Edit: An address like this http://127.0.0.1:8096 or this http://

<ip address of Linux mint system>

How? Like http://

<ip of mint>

How do you know the server is worker fine? How are you accessing it to know that?

E:

Do you have a firewall running on your mint installation? If so have you allowed the ports (8096/8097)

Can you access the web client on the Mint installation http://

<ip of mint>

Can you use that same address on your phone / another computer to access it?

FYI If you’re using 127.0.0.1 that will not work on your phone or any client that’s not running the Jellyfin server.

When you use the Jellyfin app which server address are you putting in?

Gbvb

Vghh

Which is unfortunate. Hiding projects, code and support behind discord is just wrong.

There are Linux and open source communities on discord. I mean, just think about that for a second. These people have chosen to put their stuff on a platform that has refused to acknowledge the existence of their OS / development platform. Every other post on Reddit in the Linux community before I left was about some half assed discord workaround.

I’m not saying it’s the right way, but I thought this had been possible for quite some time by using a safari extension like https://apps.apple.com/us/app/customize-search-engine/id6445840140

UPDATE:
I was able to create my own variant under DYI. I took a look at the ai-c3 ( Core1262-868M ) and DIY v1_1 (esp32doit-devkit-v1) variant and combined them into a working configuration.

I'm going to call this new variant of the firmware, "aspec". Simply because when I first found out about this project, I assumed the SX1262 Core1262-868M and wroom-32 would just work out of the box with one of the million firmware variants available. "Amazon Special" ( aspec )

I also have a GPS that I'd like to add, so I'm going to keep playing around before I submit anything to the metastatic firmware repo.

Is there a firmware update for the controller when using the Xbox accessory App on windows?

https://libvirt.org/kbase/virtiofs.html

If you’re using invidious and have the web client, iOS or android client like Yattee.. wouldn’t your default feed essentially be a playlist of all new videos?

Thanks for sharing!

While there are existing tools like journal-viewer (https://github.com/mingue/journal-viewer), which uses WebKit, I found that its GUI doesn’t integrate well with the Qt/Plasma ecosystem.

I was going to bring that up. I’ve never heard of journal-viewer, but I have used:

• GNOME Logs
• KSystemLog
• QJournalctl

You mentioned specifically integrating well into QtPlasma, what improvements do you hope to have over the native KDE KSystemLog?

Pornhub.com has nothing to do with Jesus.com

This thread is about whether or not Walz was aware of the lyrics of a Neil Young song. Being a fan of The Grateful Dead added to the discussion.

Walz seems like a respectable person. We will see how that plays out. Charles Manson and Mark Chapman were obsessed with Beatles, but I don’t associate them to everyone else who enjoys their music. So I’m not really clear on the point being made here.

It’s funny how often this is brought up and how the answer is that’s it’s been solved since nearly the begging of the web.

I’ve been using an RSS manager / server for decades! Right now it’s FreshRSS as the server and using Lire as a client on iOS. There’s arguably no better way to consume content.

It seems that the commenter’s intention was clear to everyone except you. The commenter acknowledged the need for RAID software or a specific file system, mentioning that it had already been addressed. Understood the budget and OP being an newb.

Although their tone may have been blunt, they stayed focused on their original point.

But you just kept nagging. lol

Either way OP was helped and now you can sleep knowing you did your part. A true internet hero.

I was finally able to fix the washed out issue when enabling HDR.

Turns out my TV has known HDR issues with devices like the AppleTV Apple Discussion I reset the picture to default. Opened the picture menu where it displays the signal. Enabled HDR on the Display Configuration and this time instead of washed out, it was an actual proper HDR desktop.

This is why I self host invidious. I enjoy YouTube content, but I want a clean, targeted experience when viewing videos.

This is also why I self host FreshRSS and use a client like Lire. I want clean and targeted news feeds.

This is why I haven’t had cable in 20 years and self hosted my own videos by legally purchasing dvds/blurays and ripping them. ( later adding ad free subscriptions ). I hate commercials with a passion and refuse to experience them ever again.

All of this has allowed me to have a very controlled experience and I wouldn’t have it any other way.