My mustache hairs point down and look sloppy when I try to go full handlebar, what's the best way to tame it? Like should I brush it and blow dry after showering? Or something else?

Say my deductible is 1500 and I need a procedure that’s costs $1000 but my insurance will cover 50% before deductible. A few months before the procedure I managed to meet my deductible though does that mean they will cover 100% of it or the 50% still?

If possible try to explain like I’m five

I foudn this program https://www.thearmoredgarage.com/ and just wondering if anyone has any experience with it and if it's worth buying or not?

Is there software that will automatically cut large STLs based on the printer you have or is cutting something you just have to do manually?

I'm trying to lose weight and was told that hwo I eat about 800-1000 calories a day is too low and lowers my metobolism which will prevent weight loss. I've looked up some meal plans and can't really afford stuff like chicken breast, steak, or salmon every week. So that is why I'm wondering how I can eat 1500 calories a day. Are there some alternatives that I can do?

Also I'd like to ask, say I exercise and burn say 500 calories would I have to eat those calories back or no? I ask cuz I've been told yes and told no.

Just curious, I watched the movie and wondering if the movie is accurate to how powerful he was. Was he able to take on several crime families? Could he have succeeded if he didn't die?

Also was he the result of the Commision Trials? My cousin keeps insisting he was.

Preferably I’d like a site that uses Dalle 3 because it’s a let down how ChatGPT only generates one image at a time now, but sites with stable diffusion will work as well. I tried googling sites that use Dalle 3 but no luck

When would be good times to use the organic supports and the snug supports on Prusaslicer? I know organic is good for small parts but like I can’t find anything that says what snug and organic is more optimal for

I accidentally sanded my print a little too much, I don't want to reprint it since it took 12 hours, is there something I can use like clay or putty that I can apply to readd the rounded art that is sandable and that I can put primer on and paint over?

I met a girl that I'm interested in and enjoys comics like I do, would something like asking her out to a comic store be dumb? I have a hard time talking to girls so not sure if this would be a dumb idea.

Is there a recommended nozzle size for masks and helmets? Like is 0.4mm good, or would something like 0.6mm be better since the print will be big.

I've been doing a lot of research but a lot of the stuff I find is about recycling filament scrap yourself and making it a new spool which I would love to do however I don't have the time or the space to do that. Are there services that recycle PLA, PETG, and TPU I'm in the US.

Heck I'll even send someone the scrap if they want to recycle it themselves.

I want to start drinking tea more instead of coffee, I really like matcha tea but whenever I’ve had it it was with milk, but I want to drink more water and want to know if I can mix water and matcha tea?

Also I have a cold brew coffee maker, could I put the powder in the filter as I submerge it? How long would it last in the fridge (assuming I can)?

Since I got back into 3D printing I really want to fix up my prints now with sanding and coloring. Would airbrushing or traditional painting (paint brush) be better?

I'm thinking of making a dry box for my printer, however I have some questions:

1. Will using PVC pipe as a "roller" (if that's the right word) that I'll place my filament spools on be good enough? Or do the spools need to go on something more concave? Maybe I can cut some grooves for the spools to sit in? I know there are dry boxes that use like holders that you screw in, but I want to limit the amount of holes in the box.

2. Does filament have to be spaced or can I put the spools in the box to where there is no gaps but they can still move freely?

3. Does it matter if I use M6 or M10 pneumatic couplers to feed the filmanet through or is it just personal preference?

Again, excuse my ignorance, I'm just curious since I don't really know the context and everything else I found has confused me. So I'm hoping someone might be able to explain it and give me much better context.

Article: https://www.axios.com/2023/11/16/elon-musk-antisemitic-claim-tesla-shares

I ran a selftest and the manual test and the X-axis keeps failing. I don't know why.

I tried:

Re-lubing

adjusting the X-axis belt

Adjusting the cables

I've had no luck with anything :/

Edit: I've watched a video and the extruder just hangs on the left side it for most the time it doesn't go left then right, right aaway

Edit 2: I found the issue that I completely overlooked cuz I was annoyed...the bearing was sticking out somehow

!

I have a Nevermore filter with 24v fans, would it be fine to connect them to the parts that I have circled on my Prusa MK4?

Or is that dangerous?

I love horror movies especially the cheesey type of horror movies that are so stupid that they are great. I do prefer the ones that would always appear on SyFy, but any other type (that is not like the ones on SyFy and look a lot better) is fine too.