Launching first for X Series printers, with P and A Series updates planned for future release
Looks like Bambu is getting more enshittified. I am so glad I didn't let my recent frustration at my clumsiness with my Prusa steer me into Bambu-land.
They're trying hard to couch this as a security thing but I remain unconvinced that the "threats" they're positing actually exist. Do you even leave your printer connected to the outside internet anyway? I sure as shit don't.
The only person they're locking out of your printer with this is you. This is to keep you walled within their own bullshit software ecosystem as much as possible, and the only possible benefit of that is so they can inflict further restrictions later, probably in the hopes of making the software side of their crap a subscription model so they can extort you for that sweet recurring revenue.
Their bambu filament has an RFID tag in it, presumably so you don't have to tell the printer what kind of filament is loaded. I would bet big $$ that is going to be used to lock out third party filament at some point. Calling it here and now.
Meh, I don't think they're quite foolish enough to go full Juicero, but I won't be updating my firmware.
If you choose to upgrade to the firmware version with Authorization Features, you must download and install Bambu Connect (a printer control software) from the official website. After installation, you can export sliced .3mf files from OrcaSlicer and open them with Bambu Connect. This software allows you to send the files to your printer and monitor print progress.
It feels like an effort to start locking out third party tools (like any slicer other than Bambu Studio), but I'm sure it's not going to stop there. For now, they're making you slice it, export the 3mf project, import that to Bambu studio, then send it to the printer, which is likely to piss off a lot of people.
Ngl I'm just never going to update my firmware, unless they force push it without my input. My x1c works fine there's nothing I can see them adding that I need anymore.
The problem is that their newly sold machines will come with this bullshit preinstalled, so eventually I'm sure your setup will stop being a supported configuration and you'll have to rely entirely on third party tools to feed your printer if you don't already.
I love my A1 mini, but if I ever move on to a bigger machine this will make me think twice about sticking with BambuLab.
Luckily they have a procedure for enabling third party firmware, and the third party firmware (X1Plus) doesn't have to include this crap.
They have it for now. I expect that procedure will be removed within 5 years.
Here's hoping there will be third party firmware for my A1 mini some time soon... Until such a thing arrives, I'm just not going to update.
I do hope this backfires on them considerably.
Eh. I'm sure they'll continue to pay enough influencers to gush about their products all the time to keep sales running strong well into the foreseeable future.
Remember that a significant population of people deliberately buy Apple products, among other firmly closed, enshittified, and user-hostile products/systems. The majority of consumers are sadly not educated enough to care and their money is still indeed green.
So I'm just not going to update mg firmware then? I'm already using lan only mkde, and if I have to start using an SD card I guess I can do that.
My A1 mini is 3 weeks old and I love it but this sucks.... It always starts with "security" and i can totally see them going subscription model and locking you into their ecosystem. I guess that's why it was so cheap and on sale haha. Sucks to see such an amazing product and success to go downhill so quickly...
It's already happened with the Anycubic Kobra 2 Max - no way to connect directly, everything must go through their cloud to print, via their slicer only.
This is exactly why I pre-ordered the Prusa Core ONE when it was announced for twice the price of anything Bambu has on hand and told both recent curious friends getting into printing to look elsewhere. Bambu was ALWAYS gonna go down this path, it was only a matter of time.
That made it so much easier when I eventually will upgrade my printer... should have gone with Prusa in the first place.
Open source or no sauce from me to this company.
Louis Rossman just dropped a rant about this: https://youtu.be/aIyaDD8onIE
7.4 "Your Bambu Lab product will automatically search for and download new update packages to provide you with timely update services... Due to the importance of these updates, your product may block new print job (sic) before the updates is installed"
wow.
I knew I should have bought the Qidi X-Smart3 instead of the A1 Mini.......
Glad I didn't pull the trigger on one of these. I have no idea what I would possibly need security for my printer from, this is there for them, not the user.
Damn where all the Bambu fan boys at now?
When I got my current printer I considered a Mini… thankfully it was too bulky to replace the MonoPrice Select Mini, and I ended up replacing that and the Ender 3 with a Sovol SV07 Plus. Looks like it was a lucky choice!
Ugh, ive been eyeing them for a first printer but the back-asswards network stuff kept me away (seriously? No ethernet for a large stationary device?). Are there any printers like Bambu (ie, plug and Play) that arent internet-of-shit cloud-only abandonware?
Prusa!
While I fully support that comment, their cloud printing thing also is annoying - I'd rather they spend effort on proper lan printing.
On my mini I'm still using octoprint (even though I've added a network card), on my mk4s I'm using the local connection for uploading - but I got the GPIO board, so once I have time that should enable me to get better monitoring working again. But it all still feels kludgy - something like enabling octoprint control via network instead of USB for the mk4 would be way nicer.
Love my Prusa XL. Bought the single head and have been having fun with it. Bought a second head for my Christmas present and have been playing with two color prints.
Printed some colorful lizards for my mom.
Qidi.
I've owned two and they've been very nearly completely turn-key (the OG X-Plus) and absolutely completely turn-key (my current X-Max 3). Their bigger machines are fully enclosed and have active chamber heaters to manage pain in the ass materials like ABS and ASA, and even polycarbonate.
They have their "own" slicer but it's just a mildly breathed upon fork of Prusaslicer with built in presents and which has all the plugins for remotely administering their machines already included. You can use stock Prusaslicer, Cura, or Orca with them if you prefer. The boards just run Klipper. You have terminal access, and you can hack the machine however you want if that's your jam.
Their upcoming gen 4 machines promise compatibility with an AMS-like "Qidi box" filament exchanger system, although the details of that remain unspecified at the moment. If you want multimaterial now they have a true dual extruder model also.
As of yet, there's no lockdown, no cloud bullshit (to be fair they do now have some kind of cloud bullshit platform available, but it's entirely optional and I've never touched it or even bothered to look at it), nothing proprietary, and so far there have been no rug-pulls on any of the above.
A friend of mine was gifted an X-Smart 3, cool little machine. I've been tutoring himb on printing, then the other day he texted me, distraught, that the machine had broken down, displaying a Klipper serial error; told him not to worry, we'd fix it... He didn't really believe me, but once there I just ssh'd into it from his computer (thank God Windows has PowerShell nowadays), found out that his printer.cfg had been zeroed! I extracted a copy from an update file, used scp to transfer it, et voilà, back in business.
Now, it's disappointing that this happened at all, but the openness of the device allowed for a quick repair that wouldn't have been possible otherwise.
I'm very interested in that, since it has Klipper. Looks comparable to the Bambu and with the heated chamber for ABS, that's a win. I have no need for multicolor printing, I'm definitely going to put this on the list.
Thanks.
A few months ago, BambuLab talked about this change.
This shouldn't catch anybody by surprise.
![[BambuLab Blog] - Firmware Update Introducing New Authorization Control System](https://lemmy.world/pictrs/image/8079103f-eeae-43d4-b1b7-fe581a4da15e.jpeg?format=webp&thumbnail=256)