Obscure screw added so appliance cannot be disassembled
Obscure screw added so appliance cannot be disassembled
Basic blender went bad (motor ran but spindle wasn't rotating). I wanted to disassemble to see if it could be repaired. Three of the four screws were Phillips head. I had to cut the casing open in order to discover why I couldn't unscrew the fourth. It was a slotted spanner.
You're viewing a single thread.
Thought they might sell these specialty tools online, but 3 minutes of searching came up with nothing. Might be time to get creative.
Do you have the room to get a Dremel in there the cut it so a regular flathead will work?
If not, maybe try to use needle noise pliers as your screwdriver.
As a last resort, pick up a cheap screwdriver and cut it to make it slotted.
Edit: I love how quickly several people have commented with links to the needed tools. Thanks to all of you!
https://www.ifixit.com/products/mako-driver-kit-64-precision-bits
iFixit sells kits like this that have every screw head imaginable. No need to get creative.
Edit: fixed link
Nice. Thanks for the link.
FYI: There is an "s" missing from the end of that url. https://www.ifixit.com/products/mako-driver-kit-64-precision-bits
FYI: There is an "s" missing from the end of that url. https://www.ifixit.com/products/mako-driver-kit-64-precision-bits
Thanks, fixed
Hows the durability of their stuff? I've been intrigued.
I've had this kit for about two years and it's been excellent. I don't use it for much outside of electronics, which is not very taxing on these tools.
Awesome appreciate the insight! Next time I need something weird I'll grab a kit and chuck the rest of my amalgamation of random one-offs.
If you snap one, they will send you a replacement for free. I chipped one of the security torx once, and was surprised at how easy it was to get replaced.
thats whats up!
I have this kit and I remember seeing a similar head in there. Highly recommend it. I’ve used it a bunch.
Same, and I bought one over 6 years ago. Would buy again 11/10
...
I have this exact set. The bit he needs is second from the right, third from the bottom
Depending on the size, I've absolutely gotten small versions of these bits in IT/Electronics repair kits.