It is whatever you buy a battery and charger for first. Then you are unwilling to forfeit that battery to just buy another tool. So you get another tool of the same brand, even if you aren't happy with the previous. Then at that point, you've gone to far. You've got several hundred dollars in batteries you would have to give up just to switch. It is the most blatant example of the sunken cost fallacy.
Ryobi, specifically has entry level tools (a basic drill) that come with a charger and battery for cheaper than you can even buy a battery by itself. When you're young and broke and all you need to do is hang some curtains or something you get it. But really, it is just a seed for your future "house" that you belong to.
This tracks.
DeWalt: high quality and good pedigree but overpriced = Slytherin
Milwaukee: basically the same as DeWalt, but less pretentious. Thinks they're better and tougher though = Gryffindor
Makita: the smart choice for value, also best colors = Ravenclaw
Ryobi: I know it will break, but they're just tools and I'm not serious about this anyway. I would rather spend more money on my family or other hobbies = Hufflepuff
Honorable mentions of other "houses" and schools in the thread.
Black and Decker/Craftsman/whatever. Used to be very impressive, but completely corrupted. Probably evil = Durmstrang (Russian school)
Festool: Beautiful, absolutely dripping with wealth signals. Still pretty amazing at what they do, but you might not want them on a job site = Beauxbatons (super wealthy French school)
Harbor freight: Simple, potentially the most powerful but also likely to break. Can probably accomplish what you need by using a wrench as a hammer, but you wouldn't want to do anything delicate with it. Actually the biggest group of dad-wizards = Uagadou (the school in Uganda where magic was invented but they don't use wands)
I dropped my locking, variable speed, single direction, corded drill with the chuck key electrical taped to the cracked plastic cord on a board and the hole I needed formed naturally out of fear.
You need to know that most power tools are ultimately owned by only a few brands
Milwaukee and Ryobi for example are both owned by TTI but the Marketing is strong.
https://www.protoolreviews.com/power-tool-manufacturers-who-owns-them/
House DeWalt: The Builders
House Ryobi: The Slapjobs
House Milwaukee: The wishes they were house DeWalt
House Makita: Quality prevails regardless of how little I use my tools.
Unmentioned:
House Bosch: House Makita but doesn't like Asians
House Metabo: House Milwaukee but green
House Rigid: wow these are fuckin cheap
House Worx: Tools take a backseat to Yardwork
House Metabo HPT: My wife says they're great
You remember how Harry chose the house he wanted to be in, and it's canon, that the sorting hat ward isn't definite? When I was buying my first tool, I wanted a Ryobi. But they didn't have it in stock and they did have Makita on sale and the sales guy told me that would be much better for the same price. So after that I'm buying only Makita, to fit the rest.
Quality-wise, Makita > DeWALT ≥ Milwaukee > Ryobi, at least, if you watch teardowns by guys like AvE.
Power tools are like cars; companies hold several brands and target them to different market segments, like Porsche and VW.
Ryobi is owned by the same company as Milwauki; it's the budget line, Milwauki being their premium line.
DeWALT and Black & Decker are owned by the same company; DeWALT is their premium line.
The exception in this list is Makita, which is its own company. They're also objectively more well-built than the others (here), and correspondingly usually more expensive.
The premium lines are better quality (not just more expensive) but also tend to have smaller battery-tool options. Despite being a budget line, I mostly own B&D because most of my tools these days are 24V and there are more tool options there. The few, select, DeWALT tools I have are noticably better quality.
I don't use power tools enough to justify Makita, but also, their battery-powered line is comparatively tiny. As someone else said, there's a lot of motivation to pick a (compatible) lane, whichever it is. For most home-gamers, the quality difference will probably not matter much. If I were made of money, though, I'd have everything Makita except for the things they don't make.
I’m in that fifth house that no-one ever seems to talk about: BOSCH.
J/K, I’m mostly Bosch, but I look towards whichever manufacturer makes the best version of a tool I currently need. For example, my chainsaws and yard/orchard power tools are Stihl, my lawnmower is Husqvarna, my circular saw, worm drive saw and abrasion/steel cutoff saw are all Skilsaw (not Skil!), and my oscillating multi tool is Fein.
Plus, many of the domestics are vintage, from before production was outsourced out of America, which makes them much more reliable and robust than modern tools. Even some of the other tools are vintage -- my Stihl 076 Super can cut through a 60cm log like a hot knife through butter. And I have both 36″ and 72″ bars to go with it.
20v to house DeWalt!
I love “the wire” scene on picking a power tool.
“Yeah. Cordless'll do that. You might want to consider the powder-actuated tool. The Hilti DX460MX or the Simpson PTP. These two are my Cadillacs. Everything else on this board is second best, sorry to say. Are you contracting or just doing some work around the house?”
That's because the batteries have become the printer ink of the tool world. They're f'n expensive.
If you buy into a product system it makes no sense to have different batteries that don't fit all the tools. If you keep the batteries all the same then you can be charging one or two sets vs having to buy extra sets and charger multiplied by the different tool makers.
I have one of the manufacturers shown in the image, and after I got a kit that had a charger, tool, and extra batteries included I got hooked in because they sell tools without batteries, but I have extra! So I bought same maker. The tools are all pretty good, so not much difference between makers, but that's one way they hook you.
I landed in DeWalt when their cordless devices became as good as/better than corded tools; I standardized on their battery platform only for them to abandon my battery and roll out a new (incompatible) one. Shortly thereafter my batteries bricked and it seems the business model is to force consumers to buy new tools every so often
FML I hate it that they're all proprietary and incompatible
GryffinDeWalt
Milwauflepuff
Ravenkita
SlytheRyobiOnly Bosch! Only hardcore!
IT'S MORPHIN' TIME!! Milwaukeesaurus Rex! Dewalt-toothed tiger! Tri-Ryobi-ceratops! Makitadon!
Milwaukee and Ryobi are owned by the same company. https://www.protoolreviews.com/power-tool-manufacturers-who-owns-them/
While I do have a couple of DeWalt drills, I've been a member of the House of Ryobi for 20+ years. Ryobi was the first to really push the idea of "one battery fits all" ecosystem with their 18V ONE batteries.
My Wife bought me a tool set for Christmas one year and I have never looked back. 20 years later I'm still using those tools and Ryobi still supports them. A new Lithium battery battery still works in my old tools. The "pro tools" do not take that track.
DeWalt gang rise up
Cries in the corner with his WORX tools
As a Semi pro, I run Metabo HPT for power tools and beat the hell out of them and get free batteries. Never had a tool or battery die in several years.
For groundskeeping I go with worx. They're great but aftermarket batteries suck ass.
Any plug in tools that aren't antiques are rigid, their warranty is nuts, and their mitre saw has the widest range of any I've ever used. Plus free service and parts for life.
My coworker runs Milwaukee, lots of variety, but he's had two drills and three batteries die in 3 years of basic use, so I'm not sure if I trust them wholly. The packout is nice, but there are better options out there for portable tool chests now, like flex and toughbuilt.
I know a few pros who switched to flex tools and swear by them, but they're too fresh to market to know for sure, although the company has been around forever supposedly.
Makita still going strong after 15yrs of use. They were the best at the time and still works amazing today with backwards compatibility batteries. My 15yrs old driver can use a brand new battery that a 2023 model uses.
Drill a 1/2" hole through 4" thick stainless without a hiccup on a single battery. Then tap the hole on the same battery. Impressive power and reliable
Damn, Ridgid can't even end up in this image. You make my tools sad. :(
It's surprisingly hard (at least for me, perhaps I'm looking wrong :p) to find general comparisons comparing the brands for overall usefulness. You'll find stuff comparing their drills, or something specific, but not everything overall. Which seems much more important, as (as has been mentioned in these comments) the batteries really lock you into one brand.
If we're gonna talk about tools, I gotta shout out porter cable for making an absolute tank of a circular saw. Finally went cordless Bosch, but that porter cable has a good 20 years or so of heavy use and it's still kicking.
House Ego: I don't want the cheapest thing, but I'm only willing to go a single step up.
Where is the power fist / what ever is cheapest?
For those who hate being stuck with one brand because the batteries are so expensive you can buy adapters to convert between them. For instance I use a rigid battery with a ryobi tool etc and it works great! I've seen adapters for working between most of the brands since almost all the tools are 18V. I've seen ones that jump between lower voltages and higher ones which is a bit sketchier but are likely fine as well. https://www.google.com/search?q=power+tool+battery+adapter
I got three of the four, just one more power tool set and I'll be sweet lol
As a plumber milwaukee is where it's at, only brand that has a cordless snake/augur, air snake, compact propress, expansion pex and copper cutter tools.
House Makita brings honor to our projects with powerful Nippon steel.
Seriously though, back when I worked for a small construction outfit. There were two teams of contractors. One vietnamese, the other Bosnian. They all bought used Makita tools.
I had no idea there even was a market for used tools back then. But it was enough to sell me on them myself. But man, are they pricier.
How dare they ignore the fifth and oldest house, House Craftsman
I’ve been pretty happy with the Ryobi 18 and 40 volt stuff. If I ever need anything fancier I’ll probably start investing in milwaukee. At some point I plan to invest into a tool storage system and milwaukee may win that decision…
For corded stuff, brand loyalty isn’t that useful. I have a dewalt portable/job site table saw I really like.
My jigsaw and circular saw are skil, so I could probably stand to upgrade, but they work well enough.
Just bought a kobalt powered screwdriver that uses usbc to charge and seems fine for household use (when a drill driver is not needed)
Still have an old dewalt drill on a dead battery platform that refuses to die.
Me with my Ryobi miter saw, Milwaukee toolkit, Black & Decker powerdrill, and Mastercraft oscillating saw like i'm collecting infinity stones
I am from the Metabo house. Its a German company I used to work for. Pretty decent gear. They have a deal with a lot of smaller, specialised brands to share their battery system.
I have a mishmash thanks to some battery adapters I found on Amazon. I swap between Dewalt, and two Milwaukee ecosystems seamlessly
DeWalt for drills, etc.. I used to work in a hardware store (a small town store, not a Lowes/HD big box place) and sold DeWalt, so that's what I gravitated toward when I was buying tools for myself.
But for yard tools, 40v Ryobi.
How about dads who went with the discount hardware store's brand. It's easily 1/4 Dewalt prices and comes with a 5 year no questions asked warranty? I spent like 80euros on two 18V cordless drills. I keep the receipt in the case they came in, and in the last 8 years I've abused the shit out of them, and have had at least one replacement. Just like Dewalt, makita, milwaukee, and ryobi, I have several batteries and charges, and a plethora of tools with the same battery.
I went to the store with a beat up drill, and the pimply faced teen at the register was like wtf?!? But the manager didn't want the full story on the phone. Only three questions "is it [store brand]?" "is the receipt less than 5 years old?" and "what are you calling me for then?". New drill, new case and new receipt. Oldest drill is about 4.5 years old now, so I guess that I have to torture the hell out of it and get a new one with 5 more years.
Kobalt gang 😎
Heck yeah! Makita is just Makita!
In Australia
Ryobi: for DIY, apprentices or otherwise cheapskates. No shame in it. Best bang for buck if you don't wear them out and the best part is you're not going to be worried that someone will nick off with them. A lot of their range isn't brushless and these tools will let you down the moment you need to do something moderately demanding.
Milwaukee: has won the trades tool war. They have a huge range of tools and their customer service with regard to warranty replacement can't be beat. Tradies are very comforted that know that they can abuse the crap out of their tool and not be out of pocket.
Makita: my house. I consider more of a gentlemans tool even though many swear they are the most rugged things out there. I think their batteries are better than the competition in terms of overall cycles so long as they are not abused. Their carpentry tools are so so buttery to use. Wish they had a bigger tool range.
Bosch: Not as good as the above two but priced the same or higher. Limited tool range. Batteries are really not amazing. Sad to see but the only persons using these are really those who insist on buying only a german/european branded product.
Dewalt: Yellow is not as good as red or teal and is priced accordingly. Weird second best niche. Batteries kind of trash imo.
Ozito/Ferrex/etc: Chinesium. Bit of a roll of the dice. Some stuff may last but generally expect these tools to fail at some point even with light usage. Generally not fun/comfortable to use either.
This is an Erbauer household, thanks to battery ecosystems (decent tools though)
Good news everyone! Apparently, EU went for it https://youtu.be/eKOvXigyrXA?si=XiTMEQfNU1XmF2LQ
Shiiiit, here I thought my pops was just poor, he was being worldly buying whatever brand was the sale.
Where’s Facom
With how long they last, you could be a Makita grandad
Permanently Deleted
I'm a middle aged Dad. I testify in the affirmative this is the holy truth.
I'm not a dad, and I'm pretty heavily bought into SB&D's Craftsman V20 ecosystem. Some of them are clearly discount DeWalt, especially the brushless tools.
Corded tools, I have no loyalty. My table saw and planer are DeWalt, my drill press and jointer are Wen, I've got a Kobalt router table, and so on.
I was sorted long before my kids were born
What about us who only have one accurate drill to assemble and mount IKEA furniture and then buy everything else corded as we will use it once in 2 years or maybe never, but we want to have it as we're thinking about having a small shed one day so we can finally make those 5 shelves for pantry and 2 cubic meters of storage space in the loft/garage?
I have mostly Black and Decker. Out of those four, it's a shame only DeWalt looks nice. That's probably what I'd go for based on looks and reputation. Otherwise Hilti is what seems to be recommended the most.
Idk what its called but if my daughter comes home with a dude who prefers anything other than those neon tools I'm sending him home.
