This article describes how to setup keyboard shortcuts in QubesOS so that you can temporarily disarm (pause) the BusKill laptop kill cord.

This allows the user to, for example, go to the bathroom without causing their computer to shutdown or self-destruct.

This is a guide that builds on part one: A Laptop Kill Cord for QubesOS (1/2). Before reading this, you should already be familiar with how to setup udev rules for BusKill on QubesOS.

1. A Laptop Kill Cord for QubesOS (1/2)
2. Disarm BusKill in QubesOS (2/2)

ⓘ Note: This post is adapted from its original article on Tom Hockers blog.

What is BusKill?

What if someone literally steals your laptop while youre working with classified information inside a Whonix DispVM? Theyd also be able to recover data from previous DispVMs-as Disposable VMs rootfs virtual files are not securely shredded after your DispVM is destroyed.

Are you a security researcher, journalist, or intelligence operative that works in QubesOS-exploiting Qubes brilliant security-through-compartimentalization to keep your data safe? Do you make use of Whonix Disposable VMs for your work? Great! This post is for you.

Im sure your QubesOS laptop has Full Disk Encryption and youre using a strong passphrase. But what if someone literally steals your laptop while youre working with classified information inside a Whonix DispVM? Not only will they get access to all of your AppVMs private data and the currently-running Whonix DispVMs data, but theres a high chance theyd be able to recover data from previous DispVMs-as Disposable VMs rootfs virtual files (volatile.img) are not securely shredded after your DispVM is destroyed by Qubes!

Lets say youre a journalist, activist, whistleblower, or a human rights worker in an oppressive regime. Or an intelligence operative behind enemy lines doing research or preparing a top-secret document behind a locked door. What do you do to protect your data, sources, or assets when the secret police suddenly batter down your door? How quickly can you actually act to shutdown your laptop and shred your RAM and/or FDE encryption keys?

BusKill utilizes a magnetic trip-wire that tethers your body to your laptop. If you suddenly jump to your feet or fall off your chair (in response to the battering ram crashing through your door) or your laptop is ripped off your table by a group of armed thugs, the data bus magnetic connection will be severed. This event causes a configurable trigger to execute.

The BusKill trigger can be anything from:

1. locking your screen or
2. shutting down the computer or
3. initiating a self-destruct sequence

While our last post described how to setup such a system in QubesOS with BusKill, this post will describe how to add keyboard shortcuts to arm & disarm the dead man switch (eg so you can go to the bathroom).

Disclaimer

This guide contains experimental files, commands, and software. The information contained in this article may or may not lead to corruption or total permanent deletion of some or all of your data. Weve done our best to carefully guide the user so they know the risks of each BusKill trigger, but we cannot be responsible for any data loss that has occurred as a result of following this guide.

The contents of this guide is provided openly and is licensed under the CC-BY-SA license. The software included in this guide is licensed under the GNU GPLv3 license. All content here is consistent with the limitations of liabilities outlined in its respective licenses.

We highly recommend that any experiments with the scripts included in this article are used exclusively on a disposable machine containing no valuable data.

If data loss is a concern for you, then leave now and do not proceed with following this guide. You have been warned.

Release Note

Also be aware that, due to the risks outlined above, BusKill will not be released with this self-destruct trigger.

If you purchase a BusKill cable, it will only ship with non-destructive triggers that lock the screen or shutdown the computer. Advanced users can follow guides to add additional destructive triggers, such as the one described in this post, but they should do so at their own risk-taking carefully into consideration all of the warnings outlined above and throughout this article.

Again, if you buy a BusKill cable, the worst that can happen is your computer will abruptly shutdown.

Assumptions

This guide necessarily makes several assumptions outlined below.

sys-usb

In this guide, we assume that your QubesOS install has a USB-Qube named sys-usb for handling USB events on behalf of dom0.

If you decided to combine your USB and networking Qubes at install time, then replace all references in this guide for sys-usb to sys-net.

If you decided to run your sys-usb VM as a DispoableVM at install time, then replace all references in this guide for sys-usb its Disposable TemplateVM (eg fedora-36-dvm).

..And if you chose not to isolate your USB devices, then may god help you.

Udev Device Matching

BusKill in Linux uses udev to detect when the USBs cable is severed. The exact udev rule that you use in the files below will depend on the drive you choose to use in your BusKill cable.

In this guide, we identify our BusKill-specific drive with the ENV{ID_MODEL}=="Micromax_A74" udev property. You should replace this property with one that matches your BusKill-specific drive.

To determine how to query your USB drive for device-specific identifiers, see Introducing BusKill: A Kill Cord for your Laptop. Note that the udevadm monitor --environment --udev command should be run in the sys-usb Qube.

ⓘ Note: If youd prefer to buy a BusKill cable than make your own, you can buy one fully assembled here.

QubesOS Version

This guide was written for QubesOS v4.1.

    
[user@dom0 ~]$ cat /etc/redhat-release Qubes release 4.1.2 (R4.1)
[user@dom0 ~]$

  

BusKill Files

This section will describe what files should be created and where.

Due to the design of QubesOS, it takes a bit of mental gymnastics to understand what were doing and why. Its important to keep in mind that, in QubesOS

1. The keyboard and UI are configured in dom0'
2. USB devices (like the BusKill device) are routed to the sys-usb VM
3. dom0 has the privilege to execute scripts inside other VMs (eg sys-usb)
4. By design, VMs should not be able to send arbitrary commands to be executed in dom0
5. ..but via the qubes-rpc, we can permit some VMs (eg sys-usb) to execute a script in dom0 (though for security reasons, ideally such that no data/input is sent from the less-trusted VM to dom0 - other than the name of the script)

Due to the constraints listed above:

1. Well be configuring the disarm button as keyboard shortcut in dom0
2. Well be saving and executing the buskill-disarm.sh script in sys-usb (because these scripts manipulate our udev rules)
3. The keyboard shortcut in dom0 will actually be executing the above script in sys-usb

sys-usb

If you followed our previous guide to setting-up BusKill in QubesOS, then you should already have a file in sys-usb at /rw/config/buskill.rules. You may even have modified it to trigger a LUKS Self-Destruct on removal of your BusKill device.

Because youre now experimenting with a new setup, lets go ahead and wipe out that old file with a new one that just executes a soft-shutdown. You might need some days to get used to the new disarm procedure, and you probably dont want to suddenly loose all your data due to an accidental false-positive!

Execute the following on your sys-usb Qube:

    
mv /rw/config/buskill.rules /rw/config/buskill.rules.bak.`date "+%Y%m%d_%H%M%S"`
cat << EOF | sudo tee /rw/config/buskill.rules
################################################################################
# File:    sys-usb:/etc/udev/rules.d/buskill.rules -> /rw/config/buskill.rules
# Purpose: Add buskill rules. For more info, see: https://buskill.in/qubes-os/
# Authors: Michael Altfield 
# Created: 2020-01-02
# License: GNU GPLv3
################################################################################
ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_MODEL}=="Micromax_A74", RUN+="/usr/bin/qrexec-client-vm dom0 buskill.softShutdown"
EOF
sudo ln -s /rw/config/buskill.rules /etc/udev/rules.d/
sudo udevadm control --reload

  

Now, lets add a new udev .rules file. This one will always just lock your screen, and its what will be put in-place when BusKill is disarmed.

Execute the following on your sys-usb Qube:

    
cat << EOF | sudo tee /rw/config/buskill.lock.rules
################################################################################
# File:    sys-usb:/etc/udev/rules.d/buskill.rules -> /rw/config/buskill.lock.rules
# Purpose: Just lock the screen. For more info, see: https://buskill.in/qubes-os/
# Authors: Michael Altfield 
# Created: 2023-05-10
# License: GNU GPLv3
################################################################################
ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_MODEL}=="Micromax_A74", RUN+="/usr/bin/qrexec-client-vm dom0 buskill.lock"
EOF

  

The careful reader will see that were not actually disarming BusKill in the same sense as our BusKill GUI app. Indeed, what were actually going to do is swap these two files for 30 seconds.

This way, if BusKill is armed and you remove the cable, your computer shuts-down.

But if you want to disarm, the procedure becomes:

1. Hit the Disarm BusKill keyboard shortcut (see below)
2. Wait for the toast popup message indicating that BusKill is now disarmed
3. Remove the cable within 30 seconds
4. Your screen locks (instead of shutting down)

Personally, I cant think of a QubesOS user that would want to leave their machine unlocked when they go to the bathroom, so I figured this approach would work better than an actual disarm.

Bonus: when you return from your break, just plug-in the BusKill cable in, and itll already be armed (reducing the risk of user error due to forgetting to arm BusKill).

Now, lets add the actual buskill-disarm.sh script to disarm BusKill:

Execute the following on your sys-usb Qube:

    
cat << EOF | sudo tee /usr/local/bin/buskill-disarm.sh
#!/bin/bash
 
################################################################################
# File:    sys-usb:/usr/local/bin/buskill-disarm.sh
# Purpose: Temp disarm BusKill. For more info, see: https://buskill.in/qubes-os/
# Authors: Tom 
# Co-Auth: Michael Altfield 
# Created: 2023-05-10
# License: GNU GPLv3
################################################################################
 
# replace the 'shutdown' trigger with the 'lock' trigger
sudo rm /etc/udev/rules.d/buskill.rules
sudo ln -s /rw/config/buskill.lock.rules /etc/udev/rules.d/buskill.rules
sudo udevadm control --reload
 
# let the user know that BusKill is now temporarily disarmed
notify-send -t 21000 "BusKill" "Disarmed for 30 seconds" -i changes-allow
 
# wait 30 seconds
sleep 30
 
# replace the 'lock' trigger with the 'shutdown' trigger
sudo rm /etc/udev/rules.d/buskill.rules
sudo ln -s /rw/config/buskill.rules /etc/udev/rules.d/buskill.rules
sudo udevadm control --reload
notify-send -t 5000 "BusKill" "BusKill is Armed" -i changes-prevent
EOF
sudo chmod +x /usr/local/bin/buskill-disarm.sh

  

dom0

If you followed our previous guide to setting-up BusKill in QubesOS, then you shouldnt need to add any files to dom0. What you do need to do is setup some keyboard shortcuts.

In the QubesOS GUI, click on the big Q Start Menu in the top-left of your XFCE panel to open the Applications menu. Navigate to System Tools and click Keyboard

Click the “Q” to open the QubesOS Application Menu	Click System Tools -> Keyboard

Click the Application Shortcuts Tab and then click the + Add button on the bottom-left of the window.

Click the “Application Shortcuts” tab to add a Keyboard Shortcut in Qubes	Click the “Add” Button to add a new Keyboard Shortcut in Qubes

In the Command input field, type the following

    
qvm-run sys-usb buskill-disarm.sh

  

The above command will execute a command in dom0 that will execute a command in sys-usb that will execute the buskill-disarm.sh script that we created above.

After typing the command to be executed when the keyboard shortcut is pressed, click the OK button

Now click OK and, when prompted, type Ctrl+Shift+D (or whatever keyboard shortcut you want to bind to Disarming BusKill).

Type "Ctrl+Shift+D" or whatever keyboard shortcut you want to trigger BusKill to be disarmed for 30 seconds	                                           

You should now have a keyboard shortcut binding for disarming BusKill!

Test It!

At this point, you can test your new (temporary) BusKill Disarm functionality by:

1. Plugging-in your BusKill cable
2. Typing Ctrl+Shift+D
3. Waiting for the toast popup message to appear indicating that BusKill is disarmed for 30 seconds
4. Unplugging your BusKill cable

Your machine should lock, not shutdown.

After hitting the keyboard shortcut to disarm BusKill, you have 30 seconds to remove the cable

After 30 seconds, return to your computer and test the normal arm functionality:

1. Plug-in your BusKill cable
2. Unlock your screen
3. Unplug your BusKill cable

Your computer should shutdown, not lock.

30 seconds after hitting the keyboard shortcut, BusKill will arm itself

Troubleshooting

Is unplugging your USB device doing nothing? Having other issues?

See the Troubleshooting section in our original guide to using BusKill on QubesOS.

Limitations/Improvements

Security is porous. All software has bugs. Nothing is 100% secure. For more limitations to using BusKill on QubesOS, see the Limitations section in our original guide to using BusKill on QubesOS.

Buy a BusKill Cable

We look forward to continuing to improve the BusKill software and making BusKill more accessible this year. If you want to help, please consider purchasing a BusKill cable for yourself or a loved one. It helps us fund further development, and you get your own BusKill cable to keep you or your loved ones safe.

You can also buy a BusKill cable with bitcoin, monero, and other altcoins from our BusKill Store's .onion site.

Stay safe,
The BusKill Team
https://www.buskill.in/
http://www.buskillvampfih2iucxhit3qp36i2zzql3u6pmkeafvlxs3tlmot5yad.onion/