Ender 3 V3 Neo Enclosure
Ender 3 V3 Neo Enclosure
Hi all! I was curious to see if anyone had any recommendations for an enclosure for the Ender V3 Neo. I found a few on Amazon, but they look like grow tents and wasn’t sure if that would work well. For a bit of context, it seems like an enclosure is a must have for ABS printing which is ultimately what I’m after.
Thanks everyone!
You're viewing a single thread.
They work decently. I've never had an issue printing ABS with my comgrow one (I can actually print it easier than petg).
Although I am in the process of converting an old oven into a heated build chamber.
2 0 ReplyThank you! That’s what I’ll go with
1 0 ReplyNP. You don't need a whole lot to get the chamber temps to be ABS friendly. I do recommend keeping it open if printing PLA, though.
1 0 ReplyDoes it just get to hot for pla to cool if its closed up?
1 0 ReplyYeah, it will affect the print quality because the layers don't cool off enough in between layers.
2 0 Reply
How you manage the fumes ?
1 0 ReplyI don't. I dont print enough ABS to worry about fumes.
Although I do have a fan in my office door to suck air out (I also have a 55g aquarium and gaming rig, so it gets to 90F in there without it.
1 0 Reply